Microstructure Engineering in Multi-material Fibers
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
In this study are proposed two different procedures for health monitoring of composite materials from the strain and the acoustic emission measurement. Two systems based on optic fibre sensors were developed based on a fibre Bragg grating and a Fabry-Perot ...
Polymer optical fibers (POF) have received increased attention in recent years in the fields of data communication and sensing applications. The lower cost and higher flexibility are the main advantages of POF compared to silica fibers and make them intere ...
In this work we introduce the use of the per-band link control method in cascades of distributed fiber Raman amplifiers (DFRAs) for compensating power transients of WDM channels. By using two compensation channels, each one controlled by a proportional-int ...
We have thoroughly studied and modelled many important aspects for the realization of gas-light interactions in suspended-core fibres. The fraction of the optical field propagating in holes could be calculated from the fibre geometry to predict the total a ...
We report a "plug and play" single photon source, fully integrated with an optical fiber, emitting at 1.3 mu m. Micropillars were patterned on a single layer InAs quantum dot wafer to guarantee a single pillar per fiber core. The single exciton peak filter ...
This paper describes the outcome of two groups which are involved in the specification of guidelines for fibre optic sensors performance and testing. The "Guideline for use of fibre optic sensors" from the COST-299 guideline group, and the "Optical Strain ...
A new generation of 10 Gb/s wafer fused VCSELS show high single mode output in excess of 2mW at 80 degrees C (6mW at 20 degrees C) in the 1310 nm band and 1.5mW at 80 degrees C (4 mW at 20 degrees C) in the 1550 nm band. Error free transmission over 10 km ...
Being currently performed on highly complex and expensive equipments, active optical alignment of single mode 10 Gb/s transmitters and receivers is proving to be the bottleneck process for high volume manufacturing. In order to alleviate this production bu ...
A method for seepage and settlement monitoring in earth embankment dams using fully distributed sensing along optical fibres is proposed. A model is developed for simulating and monitoring seepage and settlement systems. This model relates the strains and ...
All-optical multicasting of a 320-Gb/s intensitymodulated return-to-zero signal with subsequent simultaneous sampling by a single parametric gate is experimentally demonstrated. The architecture used a two-pump broadband fiber-optic parametric amplifier fo ...
Institute of Electrical and Electronics Engineers2009
