Investigation of the grade of calcined clays used as clinker substitute in Limestone Calcined Clay Cement (LC3)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
In this study synchrotron X-ray absorption spectroscopy (XAS) has been applied, an element specific technique which allows Fe-containing phases to be identified in the complex mineral mixture of hydrated cements. Several Fe species contributed to the overa ...
Strain Hardening Ultra High Performance Fiber Reinforced Concrete (SH-UHPFRC) were used successfully over the last 8 years in numerous cast in place rehabilitation applications as long lasting waterproofing layers (20 to 30 mm thickness) and, combined with ...
Calcium aluminate cements (CAC) are often used in combination with calcium sulfate and Portland cement for special applications where rapid setting, rapid drying and shrinkage compensation are required. A growing fraction of the clinker, which has the high ...
The filler effect, due to the physical presence of mineral additions in cement, is mainly known to accelerate the hydration of the clinker component. Previously, this was attributed to the surface of the filler providing nucleation sites for C-S-H as there ...
Rietveld quantitative phase analysis has become a widespread tool for the characterization of Portland cement, both for research and production control purposes. One of the major remaining points of debate is whether Portland cements contain amorphous cont ...
The interest of German building masters towards hydraulic binders grows at the third decade of the 19th century. This acute interest is stimulated by the import of «Roman Cement» from England and by the acquisition of the knowledge related to it. The disse ...
The interest of German building masters towards hydraulic binders grows at the third decade of the 19th century. This acute interest is stimulated by the import of «Roman Cement» from England and by the acquisition of the knowledge related to it. The disse ...
Within the strengthening techniques of masonry elements with Fiber Reinforced Plastic (FRP) materials, the use of FRP grid applied with cement based mortar seems to be very promising and interesting, mainly due to the compatibility of the mortar with the m ...
This thesis investigates the replacement of Portland cement by addition of high amounts of calcined clays and limestone. Such ternary blends can become more ecological and economical binders to answer the worldwide housing shortage. It could be demonstrate ...
H-1 nuclear magnetic resonance (NMR), supported by a measurement of the degree of hydration using X-ray diffraction, has been used to fully characterise the nano-scale porosity and composition of calcium-silicate-hydrate (C-S-H), the active component of ce ...
