Tensile viscous response of Strain Hardening UHPFRC under high restraint and isothermal conditions
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The constant improvement of polymer composite materials has allowed their integration in many industrial fields where their mechanical and chemical properties are apparently attractive. Mixed metal-composite insulators are now increasingly used for high vo ...
Tensile tests have been performed on replicated aluminum alloy foams of relative density between 4.5% and 8%. During the test the electrical resistance was measured with a four-point set-up and the displacements along the gage section were measured using a ...
The influence of applied stress on the equilibrium shape of a liquid intergranular inclusion is derived to show that (i) results differ significantly from those for a void, and (ii) this difference explains the experimental data if liquid inclusions behave ...
Hot tearing is one of the most severe defects observed in castings, e.g. in billets or sheet ingots of aluminum alloys produced by DC casting. It is due to both tensile strains and a lack of interdendritic feeding in the mushy zone. In order to predict thi ...
The monotonic and cyclic crack growth rate of cracks is strongly influenced by the microstructure. Here, the growth of cracks emanating from pre-cracked micron-scale elastic particles and growing into single crystals is investigated, with a focus on the ef ...
This paper is an experimental and numerical investigation of desiccation and the associated cracking. First an elastic formulation of the hydro-mechanical problem is presented, based on an analogy that can be drawn with thermo-elasticity. Then, the results ...
This article presents metal ion implantation as an alternative technique to fabricate compliant electrodes for small-size dielectric elastomer actuators. When reducing the size of these actuators to below 1 cm, the ability to pattern the electrodes is adde ...
This thesis presents, develops and applies new methodologies that can quantitatively probe the mechanical and viscoelastic properties of biomaterials at the nanoscale. Elastic and viscous properties are important characteristics of materials, such as many ...
Quasi-static axial tension experiments were performed in a laboratory environment on adhesively-bonded double-lap joints from pultruded GFRP laminates. Full-scale specimens were investigated to prevent size effects. Ductile polyurethane and acrylic as well ...
Bending behaviour of members without ordinary reinforcement made of quasi-brittle materials (such as concrete or fibre-reinforced concrete) is subjected to size effect both in terms of strength and ductility. For a typical ultra-high performance fibre-rein ...
Ultra High Performance Concrete (UHPC), Second International Symposium on Ultra High Performance Concrete2008
