Combining finite element analyses and mechanical models for the assessment of reinforced concrete slabs
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
In multi-storey buildings, columns are usually not continuous through the slabs to enhance ease of construction. Consequently, in slab–column joints, slabs have to carry column loads in addition to the shear and bending moments due to loads applied to the ...
Over the past century, the use of flat slabs in buildings and especially in parking garages has been growing as it is an economic and efficient solution. Flat slabs are easy to build and have, through their smaller depth, an economical and architectural ad ...
Punching shear of reinforced concrete flat slabs supported on columns is a failure mode in which the slab fractures around the column. This type of failure is sudden and can be catastrophic in nature. Punching shear generally governs the ultimate limit sta ...
Reinforced concrete flat slabs are extensively used in buildings and parking garages. Their design is governed by deflection at the serviceability limit state and punching shear at the ultimate limit state. When no punching shear reinforcement is provided, ...
The traditional approach of codes of practice for estimating the punching strength of shear-reinforced flat slabs is based on the assumption that concrete carries a fraction of the applied load at ultimate while the rest of the load is carried by the shear ...
A multifunctional all-FRP joint has been developed for the transfer of bending moments and shear forces in thermal insulation sections of concrete slab structures used in building construction. Tensile forces from moments are transferred by horizontal GFRP ...
A large number of medium and small span bridges in Switzerland and in other countries are slab bridges, often prestressed, multi-span and supported by columns. Punching in such structures is typically governing at failure. So far, the knowledge of the infl ...
An existing hybrid-GFRP/steel joint for load transfer and thermal insulation in concrete slab structures was developed into an all-GFRP joint. The new joint consists of a pultruded GFRP tensile/shear element anchored through adhesively bonded ribs in the c ...
This paper presents the results of an extensive experimental campaign on 16 flat-slab specimens with and without punching shear reinforcement. The tests aimed to investigate the influence of a set of mechanical and geometrical parameters on the punching sh ...
The ultimate strength of reinforced concrete slabs is frequently governed by the punching shear capacity, which may be increased with addition of traditional fitments such as reinforcing steel, headed studs or shear heads. In addition to these traditional ...