Incorporation of advanced aerosol activation treatments into CESM/CAM5: Model evaluation and impacts on aerosol indirect effects

One of the greatest sources of uncertainty in the science of anthropogenic climate change is from aerosol-cloud interactions. The activation of aerosols into cloud droplets is a direct microphysical linkage between aerosols and clouds; parameterizations of this process link aerosol with cloud condensation nuclei (CCN) and the resulting indirect effects. Small differences between parameterizations can have a large impact on the spatiotemporal distributions of activated aerosols and the resulting cloud properties. In this work, we incorporate a series of aerosol activation schemes into the Community Atmosphere Model version 5.1.1 within the Community Earth System Model version 1.0.5 (CESM/CAM5) which include factors such as insoluble aerosol adsorption and giant cloud condensation nuclei (CCN) activation kinetics to understand their individual impacts on global-scale cloud droplet number concentration (CDNC). Compared to the existing activation scheme in CESM/CAM5, this series of activation schemes increase the computation time by ∼10% but leads to predicted CDNC in better agreement with satellite-derived/in situ values in many regions with high CDNC but in worse agreement for some regions with low CDNC. Large percentage changes in predicted CDNC occur over desert and oceanic regions, owing to the enhanced activation of dust from insoluble aerosol adsorption and reduced activation of sea spray aerosol after accounting for giant CCN activation kinetics. Comparison of CESM/CAM5 predictions against satellite-derived cloud optical thickness and liquid water path shows that the updated activation schemes generally improve the low biases. Globally, the incorporation of all updated schemes leads to an average increase in column CDNC of 150% and an increase (more negative) in shortwave cloud forcing of 12%. With the improvement of model-predicted CDNCs and better agreement with most satellite-derived cloud properties in many regions, the inclusion of these aerosol activation processes should result in better predictions of radiative forcing from aerosol-cloud interactions. © Author(s) 2014. CC Attribution 3.0 License.

Incorporating an advanced aerosol activation parameterization into WRF-CAM5: Model evaluation and parameterization intercomparison

Athanasios Nenes, Xiuwei Zhang, Yi Zhang

Aerosol activation into cloud droplets is an important process that governs aerosol indirect effects. The advanced treatment of aerosol activation by Fountoukis and Nenes (2005) and its recent updates, collectively called the FN series, have been incorporated into a newly developed regional coupled climate-air quality model based on the Weather Research and Forecasting model with the physics package of the Community Atmosphere Model version 5 (WRF-CAM5) to simulate aerosol-cloud interactions in both resolved and convective clouds. The model is applied to East Asia for two full years of 2005 and 2010. A comprehensive model evaluation is performed for model predictions of meteorological, radiative, and cloud variables, chemical concentrations, and column mass abundances against satellite data and surface observations from air quality monitoring sites across East Asia. The model performs overall well for major meteorological variables including near-surface temperature, specific humidity, wind speed, precipitation, cloud fraction, precipitable water, downward shortwave and longwave radiation, and column mass abundances of CO, SO2, NO2, HCHO, and O3 in terms of both magnitudes and spatial distributions. Larger biases exist in the predictions of surface concentrations of CO and NOx at all sites and SO2, O3, PM2.5, and PM10 concentrations at some sites, aerosol optical depth, cloud condensation nuclei over ocean, cloud droplet number concentration (CDNC), cloud liquid and ice water path, and cloud optical thickness. Compared with the default Abdul-Razzack Ghan (2000) parameterization, simulations with the FN series produce ~107-113% higher CDNC, with half of the difference attributable to the higher aerosol activation fraction by the FN series and the remaining half due to feedbacks in subsequent cloud microphysical processes. With the higher CDNC, the FN series are more skillful in simulating cloud water path, cloud optical thickness, downward shortwave radiation, shortwave cloud forcing, and precipitation. The model evaluation identifies several areas of improvements including emissions and their vertical allocation as well as model formulations such as aerosol formation, cloud droplet nucleation, and ice nucleation. © 2015. American Geophysical Union. All Rights Reserved.

Wiley-Blackwell2015

Hygroscopicity and composition of California CCN during summer 2010

Athanasios Nenes

We present an overview and analysis of cloud condensation nuclei (CCN) sampled in California by a NOAA WP-3D aircraft during the 2010 CalNex project. Four distinct geographical regions are characterized, including the Los Angeles basin, the San Joaquin and Sacramento Valleys, and the eastern Pacific Ocean west of southern California. Median size distributions in the Central Valley were unimodal (Dg ∼ 25nm) with a larger fraction of organic species and smaller fraction of nitrate species in the Sacramento Valley aerosol than in the San Joaquin Valley aerosol. Size distributions in the Los Angeles basin and marine outflow were bimodal (geometric mean diameter, Dg ∼ 30, 90-100nm) with similar organic fractions and some replacement of nitrate with sulfate in the marine outflow. Both fine particle and CCN concentrations were found to decrease rapidly above the planetary boundary layer (∼2 km altitude), with CCN concentrations in the boundary layer ranging from ∼102-104cm-3 STP, while fine particle concentrations (0.004-1 m diameters) ranged from ∼103-10 5 cm-3 STP. The CCN-active number fraction varied between 0-100% in the Los Angeles Basin and Marine Outflow, but was substantially lower (0-40%) in the San Joaquin and Sacramento Valleys. Values of the hygroscopicity parameter, , inferred from the CCN measurements varied from 0.1-0.25, with the highest values in the marine outflow and the lowest values in the Sacramento Valley. The values agreed well with the predictions based on size-resolved aerosol composition, but were overpredicted by almost twofold when size-averaged composition was used. CCN closure was assessed for simplified compositional and mixing state assumptions, and it was found that assuming the aerosol to be internally mixed overpredicted CCN concentrations by 30-75% for all air mass types except within the Sacramento Valley, where good closure (overprediction < 10%) was achieved by assuming insoluble organics. Assuming an externally-mixed aerosol fraction or incorporating size-resolved composition data improved closure in the other three regions, consistent with the bimodal nature of the aerosol size distribution. © 2012 by the American Geophysical Union.

Blackwell Publishing Ltd2012

Impact of biomass burning on cloud properties in the Amazon Basin

Athanasios Nenes

We used a one-dimensional (1-D) cloud parcel model to assess the impact of biomass-burning aerosol on cloud properties in the Amazon Basin and to identify the physical and chemical properties of the aerosol that influence droplet growth. Cloud condensation nuclei (CCN) measurements were performed between 0.15% and 1.5% supersaturation at ground-based sites in the states of Amazonas and Rondônia, Brazil during several field campaigns in 1998 and 1999 as part of the Large-Scale Biosphere Atmosphere (LBA) Experiment in Amazonia. CCN concentrations measured during the wet season were low and resembled concentrations more typical of marine conditions than most continental sites. During the dry season, smoke aerosol from biomass burning dramatically increased CCN concentrations. The modification of cloud properties, such as cloud droplet effective radius and maximum supersaturation, is most sensitive at low CCN concentrations. Hence, we could expect larger interannual variation of cloud properties during the wet season that the dry season. We found that differences between CCN spectra from forested and deforested regions during the wet season are modest and result in modifications of cloud properties that are small compared to those between wet and dry seasons. Our study suggests that the differences in surface albedo, rather than cloud albedo, between forested and deforested regions may dominate the impact of deforestation on the hydrological cycle and convective activity during the wet season. During the dry season, on the other hand, cloud droplet concentrations may increase by up to 7 times, which leads to a model-predicted decrease in cloud effective radius by a factor of 2. This could imply a maximum indirect radiative forcing due to aerosol as high as ca. -27 W m-2 for a nonabsorbing cloud. Light-absorbing substances in smoke darken the Amazonian clouds and reduce the net radiative forcing, and a comparison of the Advanced Very High Resolution Radiometer (AVHRR) analysis and our modeling studies suggests that absorption of sunlight due to smoke aerosol may compensate for about half of the maximum aerosol effect. Sensitivity tests show that complete characterization of the aerosol is necessary when kinetic growth limitations become important. Subtle differences in the chemical and physical makeup are shown to be particularly influential in the activation and growth behavior of the aerosol. Knowledge of the CCN spectrum alone is not sufficient to fully capture the climatic influence of biomass burning.

2003

Impact of biomass burning on cloud properties in the Amazon Basin

Athanasios Nenes

2003

Hygroscopicity and composition of California CCN during summer 2010

Athanasios Nenes

Blackwell Publishing Ltd2012

Incorporating an advanced aerosol activation parameterization into WRF-CAM5: Model evaluation and parameterization intercomparison

Athanasios Nenes, Xiuwei Zhang, Yi Zhang

Wiley-Blackwell2015