Free standing and solidly mounted Lamb wave resonators based on Al0.85Sc0.15N thin film
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Aluminum nitride thin films have been grown by reactive magnetron sputter technique using a pulsed power supply. The highly (002)-textured columnar films deposited on platinized silicon substrates exhibited quasi-single-crystal piezoelectric properties. Th ...
Three different kinds of two-port flexural resonators, with both clamped and free ends, and with nominal resonance frequencies between 5 MHz and 50 MHz, were designed and fabricated. Among them, a novel free-free third-mode resonator, as well as a tunable ...
The aim of this project work is to fabricate and evaluate a resonating silicon tube as a density and a Coriolis-based mass flow sensor. This project consists of three course works: a project work, a microelectronics project, and a master thesis. At first, ...
Very narrow spontaneous emission (Deltalambda similar to 0.5 nm), corresponding to a quality factor Q in excess of 800, has been obtained under continuous-wave excitation at room temperature with an AlInN/GaN monolithic microcavity. The structure is made o ...
Any innovative design of a chem. or biol. reactor has to consider the dynamics of the primary phys. and chem. steps involved in the overall process. For homogeneous highly viscous systems the mixing time is of crucial importance for the product quality. In ...
We have realized millimeter-size rf inductors on silicon using a polyimide mold–copper electroplating coil technology. Subsequently, the coils are assembled with magnetic cover plates of commercially available bulk Ni–Zn ferrites of high resistivity. Using ...
New applications such as wireless integrated network sensors (WINS) require radio-frequency transceivers consuming very little power compared to usual mainstream applications, while still working in the ultra-high-frequency range. For this kind of applicat ...
The presence of an electron beam in a quasioptical gyrotron cavity alters the structure of the fields from that of the empty cavity. A computer code has been written that calculates this alteration for either an electron beam or a thin dielectric tube plac ...
The goal of the project is to fabricate ultra sensitive cantilevers for magnetic resonance force microscopy. Such devices have been produced using SOI wafers and a novel fabrication process combining Al encapsulation and HF-vapor release. The realized cant ...
