Ultrahigh flux gas-selective nanoporous carbon membrane and manufacturing method thereof
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
We describe a combination of 100-mm wafer scale deep-ultraviolet (DUV) exposure and a microelectromechanical systems (MEMS) process to fabricate silicon nitride membranes with submicrometer apertures to be used as miniature shadow masks or nanostencils. Ap ...
This work dealt with the establishment of a reproducible and industrially exploitable fabrication technology for piezoelectric MEMS based on PZT thin films. {100}-textured piezoelectric 1-4 μm thick films were found to be the most suited materials for MEMS ...
The flexibility of the new available Inductively Coupled Plasma (ICP) reactors provides a lot of possibilities for process development in dry etching field. Deep anisotropic etching of silicon is now possible under control (etch rate, profiles, uniformity) ...
Fused silica microlenses with low numerical apertures (NAs) were fabricated. The original photoresist element was realized by the melting resist technology and was transferred into fused silica by reactive ion etching. Low selectivity etching was applied t ...
We present a simple method for fabricating fast resonating (90 MHz) nanomechanical elements based on the local deposition through a miniaturized shadow mask (nanostencil), followed by dry etching to release the structure from the substrate. The measured re ...
The low frequency noise of lattice-matched InP-based HEMTs gate recess etched with CH4/H2 RIE and phosphoric-acid based wet etchants was studied at different gate and drain biases in a temperature range of 77 K to 340 K. The measurements showed a significa ...
The low-frequency noise of lattice-matched InAlAs/InGaAs/InP high electron mobility transistors (HEMT's) gate recess etched with a highly selective dry etching process and with conventional wet etching were studied at different gate and drain biases for th ...
Institute of Electrical and Electronics Engineers1998
The low frequency noise of lattice-matched InP-based HEMTs gate recess etched with CH4/H2 RIE and phosphoric-acid based wet etchants was studied at different gate and drain biases in a temperature range of 77 K to 340 K. The measurements showed a significa ...
A tool and method for flexible and rapid surface patterning technique beyond lithography based on high-resolution shadow mask method, or nanostencil, is presented. This new type of miniaturized shadow mask is fabricated by a combination of MEMS processes a ...
We report an all-dry, two-step, surface nanoengineering method to fabricate nanomechanical elements without photolithography. It is based on the local deposition through a nanostencil of a well-defined aluminum pattern onto a silicon/silicon-nitride substr ...
