Following Microstructures during Deformation: In situ X-ray/Neutron Diffraction and HRDIC
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Hot tearing is one of the most severe defects observed in castings, e.g. in billets or sheet ingots of aluminum alloys produced by DC casting. It is due to both tensile strains and a lack of interdendritic feeding in the mushy zone. In order to predict thi ...
A coupled hydro-mechanical formulation is presented for the analysis of landslide motion during crisis episodes. The mathematical formulation is used to model a natural slope affected by a multiple slip surface failure mechanism, in which pore water pressu ...
The motivation of this work derives from the need of the cutting tool industry to improve its products in order to support harder and harder working conditions, namely increasing cutting speeds and working on stronger modern materials. The lifetime of the ...
This communication presents the modeling and the first demonstration of very large deformation balloon actuators based on pyrotechnics on chip. The gas and pressure generated by the combustion of a solid propellant stored in a micromachined cavity lead to ...
Al-Zn-Si alloy coatings are widely used for the corrosion protection of steel sheets. In addition to the favorable corrosion properties, the Al-43wt%Zn-1.6wt%Si coatings present several features which are of metallurgical interest. The first one is their s ...
Next-generation infra-red astronomical instrumentation for space and ground-based telescopes requires MOEMS-based programmable slit masks for multi-object spectroscopy (MOS) which has to work in cryogenic environment. A first prototype of micromirror array ...
Spie-Int Soc Optical Engineering, Po Box 10, Bellingham, Wa 98227-0010 Usa2009
Nanocrystalline metals have been an area of great interest in recent years due to their enhanced characteristics. One of the most striking is implied by the Hall-Petch relation: with decreasing grain size the material becomes stronger. This promise is fulf ...
We examine, in this work, the integration and high-strain response of piezoresistive thick-film resistors on titanium and titanium alloy, as compared with ferritic stainless steel and the standard alumina substrates. In general, titanium and its alloys are ...
The microstructural characterization of two titanium alloys, Ti5Al2.5Sn and Ti6Al4V, was performed. These alloys were selected as representatives of the alpha and alpha + beta titanium families, to investigate their possible application as structural mater ...
The attachment of the first wall modules of the ITER FEAT fusion reactor is designed using flexible connectors made from titanium alloys. An assessment of the tensile and fatigue performance of two candidate alloys, a classical two phase Ti6Al4V alloy and ...
