Publication
The surface, interface, and bulk properties are a few of the most critical factors that influence the performance of perovskite solar cells. The photoelectron spectroscopy (PES) is used as a technique to analyze these properties. However, the information depth of PES is limited to 10-20 nm, which makes it not suitable to study the complete devices, which have a thickness of similar to 1 mu m. Here, we introduce a novel and simple technique of PES on a tapered cross section (TCS-PES). It provides both lateral and vertical resolutions compared to the conventional PES so that it is suitable to study a complete perovskite solar cell. It offers many benefits over conventional PES methods such as the chemical composition in the micrometer scale from the surface to the bulk and the electronic properties at the multiple interfaces. The chemical natures of different layers of the perovskite-based solar cells [(FAP-bI(3))(0.85)(MAPbBr(3))(0.15)] can be identified precisely for the first time using the TCS-PES method. We found that the perovskite layer has higher iodine concentration at the Spiro/perovskite interface and higher bromine concentration at the TiO2/perovskite interface. UPS measurements on the tapered cross section revealed that the perovskite is n-type, and the solar cell studied here is a p-n-n structure type device. The unique possibilities to analyze the complete solar cell by XPS and UPS allow us to estimate the band bending in a working solar cell. Moreover, this technique can further be used to study the device under operating conditions, and it can be applied in other solid-state devices like solid electrolyte Li-ion batteries, LEDs, or photoelectrodes.