Aerosol acidity and liquid water content regulate the dry deposition of inorganic reactive nitrogen
Related publications (41)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Conventional equipment for plasma spraying can be adapted for operation at low pressure so that PECVD-like processing can be performed. The plasma jet generated by the torch is characterized by a high convective velocity and a high gas temperature. The inf ...
Nowadays thin films play an important role in everyday life and in industries. Thin film technology has been developed primarily for the growing demand for development of smaller and smaller devices that require advanced materials and new processing techni ...
A process for the deposition of a solid layer onto a liquid is presented. The polymer poly-di-chloro-paraxylylene, also known as Parylene C, was grown on low vapour pressure liquids using the conventional low pressure chemical vapour deposition process. A ...
Erbium-doped amorphous aluminum oxide layers deposited on Si or oxidized silicon substrates are promising construction pieces for future monolytic integrated optoelectronics devices. In a novel high-vacuum chemical vapor deposition setup the alumina films ...
Aluminum rich oxynitride thin films were prepared using pulsed direct current (DC) magnetron sputtering from an Al95.5Cr2.5Si2 (at.%) target. Two series of films were deposited at 400 degrees C and 650 degrees C by changing the O-2/(O-2 + N-2) ratio in the ...
A method for semi-continuous (10 min time resolution) PM2.5 nitrate and sulfate measurements, based on the humidified impaction with flash volatilization design of Stolzenburg and Hering (Environ. Sci. Technol. 34 (2000) 907), was evaluated during the Pitt ...
DC reactive magnetron sputtering was used for the deposition of Zr–Si–N thin films. Four series of samples have been deposited at various substrate temperatures TS: 300 K, 510 K, 710 K and 910 K. Depending on TS, different N2 partial pressures pN2 were req ...
Multilayered niobium oxynitride films were deposited onto (100) Si using DC magnetron sputtering with a reactive gas pulsing process. The argon and nitrogen flows were kept constant during sputtering of a pure niobium target and the oxygen flow was pulsed ...
We use 23 atmospheric chemistry transport models to calculate current and future (2030) deposition of reactive nitrogen (NOy, NHx) and sulfate (SOx) to land and ocean surfaces. The models are driven by three emission scenarios: (1) current air quality legi ...
Vertically-resolved attenuated backscatter from the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) mission and Aerosol Optical Thickness (AOT)from Moderate-resolution Imaging Spectroradiometer (MODIS) are used to characterize t ...