Multimodal host–guest complexation for efficient and stable perovskite photovoltaics

Formamidinium lead iodide perovskites are promising light-harvesting materials, yet stabilizing them under operating conditions without compromising optimal optoelectronic properties remains challenging. We report a multimodal host–guest complexation strategy to overcome this challenge using a crown ether, dibenzo-21-crown-7, which acts as a vehicle that assembles at the interface and delivers Cs+ ions into the interior while modulating the material. This provides a local gradient of doping at the nanoscale that assists in photoinduced charge separation while passivating surface and bulk defects, stabilizing the perovskite phase through a synergistic effect of the host, guest, and host–guest complex. The resulting solar cells show power conversion efficiencies exceeding 24% and enhanced operational stability, maintaining over 95% of their performance without encapsulation for 500 h under continuous operation. Moreover, the host contributes to binding lead ions, reducing their environmental impact. This supramolecular strategy illustrates the broad implications of host–guest chemistry in photovoltaics.

Investigation on the impact of passivation in perovskite solar cells

Erfan Shirzadi

Conversion of sunlight to electricity is the most plausible approach towards the generation of renewable energies. During recent decade lead halide perovskites (LHPs) have proven to be promising candidates for photovoltaic applications such as solar cells. LHPs can be made easily in laboratories around the world via solution process methods and many universities can afford to participate in their development. How-ever, LHPs suffer from instability issues and their efficiencies can be further improved. In this thesis, both instability and efficiency challenges are addressed. We showed by doping the precursor of methylammonium lead iodide (MAPbI3) perovskite with a relatively large cation of 2-Choloroethylammonium (CLEA), perovskites films with CLEA incorporated into their structures are formed. The novel perovskite is able to withstand high temperatures as high as 80°C while achieving efficiencies > 19% in MAPbI3-based perovskite solar cells (PSCs). Various approaches have been employed for the passivation of the defects in perovskite solar cells Vari-ous approaches have been employed to passivate the defects in perovskite films used in perovskite solar cells (PSCs). However, the passivation mechanism is often unclear at a molecular level and the reason for enhanced PSC performance remains elusive. Here, we describe passivation based on the deposition of two dimensional (2D) perovskites (obtained from para-halophenylethylammonium iodide) on the surface of perovskite films. Moreover, the mechanism of passivation was elucidated and was traced to the high work function of the 2D perovskites, which induce band-bending at the surface of perovskite film and therefore reduces the charge carrier recombination at the interface of perovskite and the hole transporting material (HTM). Efficiencies >22% with average voltages >1.15 V were achieved using a typical mesoporous-TiO2 and Spiro-OMeTAD device configuration. This study paves the way for PSCs efficiency improvement by rational design. The employment of 2D perovskites is a promising approach to tackle the stability and voltage issues inherent in perovskite solar cells. It remains unclear however whether other perovskites with different dimensionalities have the same effect on efficiency and stability. Here, we report the use of quasi-3D azetidinium lead iodide (AzPbI3) as a secondary layer on top of the primary 3D perovskite film that results in significant improvements in the photovoltaic parameters. Remarkably, utilization of AzPbI3 leads to the passivation resulting in a power conversion efficiency (PCE) of 22.4 %. The open-circuit voltage obtained is as high as 1.18 V, which is among the highest reported to date for single-junction perovskite solar cells, corresponding to a voltage deficit of 0.37 V for a bandgap of 1.55 eV. Studying the compositional instability of mixed ion perovskites under light illumination is important to understand the mechanisms underlying their efficiency and stability. However, current techniques are limited in resolution and are unable to deconvolute minor ion migration phenomena. Here, we describe a method that enables ion migration to be studied allowing different segregation mechanisms to be elucidated. We applied statistical analysis to cathodoluminescence data to generate compositional distribution histograms. Using these histograms, we identified two different ion migration phenomena, horizontal ion migration (HIM) and vertical ion migration (

EPFL2021

In Operando, Photovoltaic, and Microscopic Evaluation of Recombination Centers in Halide Perovskite-Based Solar Cells

Ulf Anders Hagfeldt, Henry Snaith, Silver Hamill Turren Cruz

The origin of the low densities of electrically active defects in Pb halide perovskite (HaP), a crucial factor for their use in photovoltaics, light emission, and radiation detection, remains a matter of discussion, in part because of the difficulty in determining these densities. Here, we present a powerful approach to assess the defect densities, based on electric field mapping in working HaP-based solar cells. The minority carrier diffusion lengths were deduced from the electric field profile, measured by electron beam-induced current (EBIC). The EBIC method was used earlier to get the first direct evidence for the n-i-p junction structure, at the heart of efficient HaP-based PV cells, and later by us and others for further HaP studies. This manuscript includes EBIC results on illuminated cell cross sections (in operando) at several light intensities to compare optoelectronic characteristics of different cells made by different groups in several laboratories. We then apply a simple, effective single-level defect model that allows deriving the densities (N-r) of the defect acting as recombination center. We find N-r approximate to 1 x 10(13) cm(-3) for mixed A cation lead bromide-based HaP films and similar to 1 x 10(14) cm(-3) for MAPbBr(3)(Cl). As EBIC photocurrents are similar at the grain bulk and boundaries, we suggest that the defects are at the interfaces with selective contacts rather than in the HaP film. These results are relevant for photovoltaic devices as the EBIC responses distinguish clearly between high- and low-efficiency devices. The most efficient devices have n-i-p structures with a close-to-intrinsic HaP film, and the selective contacts then dictate the electric field strength throughout the HaP absorber.

AMER CHEMICAL SOC2022

Highly Efficient and Stable 2D Dion Jacobson/3D Perovskite Heterojunction Solar Cells

Mohammad Khaja Nazeeruddin, Pankaj Kumar Yadav

Heterostructures involving two-dimensional/three-dimensional (2D/3D) perovskites have recently attracted increased attention due to their ability to combine the high photovoltaic performance of 3D perovskites with the increased stability of 2D perovskites. Here we report ammonium thiocyanate (NH4SCN) passivated 3D methylammonium lead triiodide (MAPbI(3)) perovskite active layer and deposition of 2D perovskite capping layer using xylylene diammonium iodide (XDAI) organic cation. The 2D/3D perovskite heterojunction formation is probed by using FESEM and UPS spectroscopy. The NH4SCN passivated MAPbI(3) perovskite has shown 19.6% PCE compared to the 17.18% PCE of pristine MAPbI(3) perovskite solar cells (PSCs). Finally, the champion 2D/3D perovskite heterojunction based solar cells have achieved the remarkable PCE of 20.74%. The increased PCE in 2D/3D PSCs is mainly attributed to the reduced defect density and suppressed nonradiative recombination losses. Moreover, the hydrophobic 2D capping layer endows the 2D/3D heterojunction perovskites with exceptional moisture, thermal and UV stability, highlighting the promise of highly stable and efficient 2D/3D PSCs.

AMER CHEMICAL SOC2022

Investigation on the impact of passivation in perovskite solar cells

Erfan Shirzadi

EPFL2021