Solute-dislocation interactions and creep-enhanced Cu precipitation in a novel ferritic-martensitic steel
Related publications (57)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The paper presents the microstructure and mechanical properties of an oxide dispersion strengthened (ODS), reduced activation, ferritic steel, namely the Fe-14Cr-2W-0.3Ti-0.3Y(2)O(3) alloy, which was fabricated by hot isostatic pressing followed by high sp ...
Copper and copper alloys typically experience a sharp loss in ductility at intermediate temperature, induced by grain boundary damage and fracture processes. The susceptibility of the material to intermediate temperature embrittlement is, as a result, stro ...
Twinned dendrite growth has been found to occur in aluminum alloys when critical thermal conditions (G approximate to 100 K/cm, nu(s) approximate to 1 mm/s) and a slight convection in the melt are present during directional solidification. Split in their t ...
Minerals, Metals & Materials Soc, 184 Thorn Hill Rd, Warrendale, Pa 15086-7514 Usa2009
Oxide dispersion strengthened steels based on the ferritic/martensitic steel EUROFER97 are developed. The reinforcing particles dispersed in the matrix of EUROFER97 are made of yttria and yttrium titanium oxides. Microstructure is investigated by transmiss ...
The goal of this project was to develop low-firing thick-film materials systems for the fabrication of piezoresistive sensors on special steels, for the fabrication of instrumented medical devices. To this end, a series of individual thick-film materials a ...
Mechanical-loss measurements were performed in three grades of martensitic high-carbon tool steels. These steels were treated under carburizing gas before quenching, in order to vary the concentration of interstitial carbon in the martensite, as assessed b ...
In the quest of materials for the first wall of the future fusion reactor, it has been shown that oxide dispersion strengthened (ODS) ferritic / martensitic (F/M) steels appear to be promising candidates. The inherent good mechanical properties supported b ...
Tempering effects have been studied in three martensitic carbon steels by mechanical spectroscopy. The mechanical-loss spectra present a relaxation peak similar to the Snoek-Koster peak in ferrite. The peak amplitude decreases upon tempering, indicating a ...
Ferritic/martensitic (F/M) steels show good resistance to swelling and low damage accumulation upon irradiation relative to stainless steels. 0.3 wt% yttria particles were added to the F/M steel EUROFER 97 to produce oxide dispersion strengthened (ODS) ste ...
This work is motivated by the industrial need to improve the thermal treatments of carbon steels used for the production of files. It aims at clearly defining the role that carbon plays in hardness and wear resistance of files. Three steel grades with diff ...