Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Deformation mechanisms in nanocrystalline electrodeposited Ni (26 nm) and Ni-Fe (12 nm) are studied by strain rate sensitivity experiments and in situ mechanical testing during X-ray diffraction. We find a relatively low strength for Ni-Fe, which may be as ...
The aim of the thesis is to obtain more understanding about the influence of plastic deformation on the microstructural changes observed in single crystal (SX) Ni-based superalloys using diffraction techniques. This work was organised around two main probl ...
Low-temperature deformation of body-centered cubic metals shows a significant amount of plastic slip on planes with low shear stresses, a phenomenon called anomalous slip. Despite progress in atomistic modeling of the consequences of complex stress states ...
Using atomistic simulations, the effect of jogs on the cross-slip of screw character dislocations and screw-dipole annihilation was examined for both FCC Cu and Ni. The stress-free activation energy for cross-slip at jogs is close to 0.4 eV in Cu, determin ...
Body-centered cubic metals are of high technological interest: for example tungsten as potential plasma facing component in future fusion reactors, molybdenum employed in aircraft parts, niobium as superconducting magnets, etc. The characteristics of their ...
A new dislocation-based model for low cycle fatigue in fcc metals at a length scale smaller than the feature size of the dislocation structures is presented. It uses the crystal plasticity finite element method and dislocation densities as internal variabl ...
The continuous matrices of atomic displacements and lattice distortion from face-centered-cubic (fcc) to body-centered-cubic (bcc) phases compatible with the hard-sphere geometry of iron atoms are calculated for different possible final orientation relatio ...
With recent developments in micro and nano-technologies, mechanical components such as those used in medicine or electronics tend to be miniaturized, requiring a new set of testing techniques to study their reliability and performance. One of the new metho ...
EPFL2011
, , ,
Activation volumes characteristic of room temperature compressive plastic deformation in Au- 45.2 at.% Cu- 1.7 at.% Pt, a near-AuCu alloy that orders to a fully L1(0) structure, are measured using the repeated stress-relaxation method. Four different order ...
Elsevier2011
Polycrystalline materials with crystallite diameters below hundred nanometer exhibit extraordinary strength which goes along with a decrease in ductility. In order to tailor tough materials, which combine strength and ductility, the underlying deformation ...
