High energy barriers for edge dislocation motion in body-centered cubic high entropy alloys
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Dislocation dynamics in a Ni-3(Al, Ta) single-crystal alloy have been studied by means of mechanical spectroscopy at intermediate temperatures, that is in the temperature range of the flow stress anomaly. The mechanical loss of specimens predeformed at 300 ...
The weak beam technique is now used widely for the determination of stacking fault energies, in particular for intermetallic alloys, and the accuracy of the approach is critically dependent upon the reliability of the relationship between the image and the ...
Slip markings produced on the surfaces of Ni3(Al, Ta) single crystals, plastically deformed at various temperatures in the flow stress anomaly domain, were examined by atomic force microscopy (AFM). A dominant feature is that for all investigated temperatu ...
Transient creep (1) tests have been performed at the yield point of icosahedral AlCuFe poly-quasicrystalline specimens in order to investigate the actual causes of this phenomenon. The experimental results strongly suggest that the yield point occurrence i ...
We consider an anisotropic phase-field model for the isothermal solidification of a binary alloy due to Warren-Boettinger (Acta. Metall. Mater. 1995; 43(2):689)., Existence of weak solutions is established under a certain convexity condition on the strongl ...
The surface morphology of GaN(0001) grown on Si(111) by molecular beam epitaxy using ammonia has been studied by near-field microscopy techniques. Two distinct morphologies are observed, depending on the growth kinetics. When using Ga-rich growth condition ...
The microstructure of the low activation F82H ferritic/martensitic steel has been investigated in the cases of the heat treated, irradiated and deformed material. The irradiation has been achieved with 590 MeV protons in the Proton IRradiation EXperiment ( ...
The dislocation structures resulting from compression tests on Ni-3 (Al, I-If) single crystals are studied as a function of the deformation temperature between 77 and 900 K. Mechanical parameters are also reported, such as the 0.2% offset stress, the work- ...
