TID Degradation Mechanisms in 16-nm Bulk FinFETs Irradiated to Ultrahigh Doses
Related publications (36)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Conventional device scaling has been the main guiding principle of the MOS device engineering over these past years. However, this aggressive scaling would be eventually limited due to the inability to remove the heat generated by MOSFET devices. The power ...
InGaAs/GaAsSb tunnelling field-effect transistors and InGaAs metal-oxide-semiconductor field-effect transistors can be integrated on the same silicon substrate using conventional CMOS-compatible processes, creating a platform for potential use in low-power ...
Total ionizing radiation compromises electrical characteristics of microelectronic devices and even causes functional failures of integrated circuits. It has been identified as a potential threat to electronic components, especially those in high-energy ph ...
This article investigates the fin- and finger-number dependence of the total ionizing dose (TID) degradation in 16-nm bulk Si FinFETs at ultrahigh doses. n- and p-FinFETs designed with different numbers of fins and fingers are irradiated up to 500 Mrad(SiO ...
This article investigates the device variability induced by the total ionizing dose (TID) effects in a commercial 16-nm bulk nFinFETs, using specially designed test structures and measurement procedures aimed at maximizing the matching between devices. DC ...
In recent years, sweat has gained increasing attention from the scientific community as a new analyte for health monitoring. The main advantage with respect to the "Gold Standard" for laboratory analysis, i.e. blood, is of course the possibility of perform ...
In this paper, the total ionizing dose (TID) response of a commercial 28-nm high-k CMOS technology at ultrahigh doses is measured and discussed. The degradation of pMOSFETs depends not only on the channel width but also on the channel length. Short-channel ...
Total ionizing dose (TID) mechanisms are investigated in 28-nm MOSFETs via dc static and low-frequency noise measurements. nMOSFETs and pMOSFETs are irradiated up to 1 Grad(SiO2) and annealed at high temperatures. TID sensitivity depends on the channel len ...
This paper presents a modeling approach to simulate the impact of total ionizing dose (TID) degradation on low-power analog and mixed-signal circuits. The modeling approach has been performed on 180-nm n-type metal-oxide-semiconductor field-effect transist ...
This paper characterizes and models the effects of total ionizing dose (TID) up to 1 Grad(SiO2) on the drain leakage current of nMOSFETs fabricated with a commercial 28-nm bulk CMOS process. Experimental comparisons among individual nMOSFETs of various siz ...