Micro-addition of Fe in highly alloyed Cu-Ti alloys to improve both formability and strength
Related publications (61)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The 2xxx series aluminium alloys, which contain Cu as the main addition element, are widely used in the aerospace industry for their high specific strength. The main strengthening contribution in these alloys comes from the formation of theta' precipitates ...
The microstructure evolution associated with the cold forming sequence of an Fe-14Cr-1W-0.3Ti-0.3Y2O3 grade ferritic stainless steel strengthened by dispersion of nano oxides (ODS) was investigated. The material, initially hot extruded at 1100 degrees C an ...
Metal additive manufacturing (AM) offers the possibility to rapidly produce complex geometries that are not achievable with conventional manufacturing methods. The two most common technologies, Laser Powder Bed Fusion (LPBF) and Direct Metal Deposition (DM ...
This study presents a thermomechanical processing concept which is capable of exploiting the full industrial application potential of recently introduced AlMgZn(Cu) alloys. The beneficial linkage of alloy design and processing allows not only to satisfy th ...
The aim of this project is to understand the correlation between alloy composition and the build-up of internal stresses in 18 carat Au-Ag-Cu alloys under thermo-mechanical loads. The copper rich end of this ternary system exhibits order-hardening of the e ...
The material and exact shape of a nanostructure determine its optical response, which is especially strong for plasmonic metals. Unfortunately, only a few plasmonic metals are available, which limits the spectral range where these strong optical effects ca ...
Shape Memory Alloys (SMA) are a class of Smart Materials that are ideal for creating compact actuators. The complex nature of their behavior results in the use of these materials in simple geometries (wires, sheets) limiting their performances. A design me ...
Age hardening induced by the formation of (semi)-coherent precipitate phases is crucial for the processing and final properties of the widely used Al-6000 alloys despite the early stages of precipitation are still far from being fully understood. This cruc ...
As cast FeCrCuMnNi high entropy alloys were heat treated at different temperatures and times. Structure and mechanical properties of the heat treated alloy were studied using X-Ray diffraction, tensile test, hardness test and scanning electron microscopy. ...
The quench protection system of the nonplanar coils of the Wendelstein 7-X stellarator was laid out over 15 years ago. At that time, the assessment of the hot-spot temperature by a basic adiabatic model was done using design values for material and operati ...