A unified description of ordering in HCP Mg-RE alloys
Related publications (38)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
High entropy alloys add a new dimension, atomic-scale randomness and the associated scale-dependent composition fluctuations, to the traditional metallurgical axes of time-temperature-composition-microstructure. Alloy performance is controlled by the energ ...
Age hardening induced by the formation of (semi)-coherent precipitate phases is crucial for the processing and final properties of the widely used Al-6000 alloys despite the early stages of precipitation are still far from being fully understood. This cruc ...
The recrystallization behavior of an Al-Cu-Mg alloy is investigated in multi-directionally forged over-aged and solution treated alloys, during non-isothermal annealing. Deformation and non-isothermal annealing are performed with a Gleeble 3800 thermo-mech ...
Alloying Mg with rare-earth elements, such as Nd, Gd, or Y, enables hardening from the precipitation of metastable coherent phases during aging at low temperatures. While the aging potential of binary Mg-Nd alloys is relatively limited due to the nucleatio ...
Under common processing conditions, both dilute and complex concentrated alloys are often realized as random alloys, with no correlation in the occupancy of lattice sites by the constituent atom types. The current thesis primary addresses two problems in r ...
The present study shows the influence of severe plastic deformation on highly stable Y-Ti-O nano-oxides present in ferritic ODS alloys used for nuclear applications. An innovative strain path implying alternated compressions was used to deform the material ...
The effects of thermal treatments on a Co-Ni-Cr super-alloy in the temperature range from 250 degrees C to 900 degrees C, resulting in secondary hardening, have been studied by Mechanical Spectroscopy. The simultaneous evolution of the internal friction sp ...
Pure Mg has low ductility due to a transition of < c+a > pyramidal dislocations to a sessile basal-oriented structure. Dilute alloying generally improves ductility. Enhancement of pyramidal cross-slip from the lower-energy pyramidal II plane to the higher- ...
Mg-3wt.%RE alloys show substantially enhanced < c + a > activity as compared to pure Mg or other Mg-Al, Mg-Zn alloys of similar grain sizes. Activation of < c + a > slip has been postulated to be associated with the reduction of the basal Li stacking fault ...
A theory to predict the initial flow stress of an arbitrary N-component fcc random alloy is extended to predict the additional strengthening when a dilute concentration of a substitutional element is introduced. Assuming properties for the N-component allo ...