On the slip burst amplitude cutoff in dislocation-rich microcrystals
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
In this study, the hot deformation behavior of an Al-1% Mg alloy with very coarse initial grain size was investigated in terms of flow stress evolution and grain refinement mechanism. The large grain size was employed to study the traditional continuous dy ...
Integrated circuit packaging technology has become a prime design consideration for the develop-ment of electronic system concepts. One key issue is the bonding layer between chip and substrate. Currently, high-lead solder materials are being used, which a ...
The effect of a linear applied shear stress gradient on the yield stress of a dislocation pileup is investigated analyti- cally using the continuum theory of dislocation pileups. The solution agrees well with numerical discrete dislocation simulations of a ...
The tensile elongation of an < 011 > oriented columnar nanocrystalline pure iron structure at a temperature of 300 K has been simulated by molecular dynamics (MD). The simulated sample contains 4.3 x 10(6) atoms and has been subject to free elongation alon ...
H-SA700 is a type of new ultra-high-strength structural steel that is more environmentally friendly and more suitable for mass production than conventional high-strength steel. The objective of this paper is to contribute to the practical application of CF ...
International Association of Earthquake Engineering2017
The ductility and time-dependent recovery of a ductile acrylic adhesive were investigated in this work. The quasi-static true tensile and compressive strain behaviors were examined at different strain rates, taking large deformations into account. Yield st ...
This work reports on the microstructure and mechanical properties of porous silver films produced with different sintering parameters. The microstructure is investigated by high-resolution ptychographic Xray computed tomography and scanning electron micros ...
Microcellular open-cell metal foams with pores of 75 or 400 pm in diameter and made of pure Al or Al-2 wt% Mg are tested in compression. The aluminum foam exhibits a typical smooth plastic flow and a positive strain rate sensitivity, whereas plastic instab ...
A series of triaxial laboratory experiments are performed on thick-walled hollow cylindrical samples of boom clay. The aim of this testing program is to better understand the anisotropic deformation during the excavation. The testing conditions are similar ...
This paper discusses on the required level of simplicity for suitable modelling of structural concrete. Traditional equilibrium-based approaches (as strut-and-tie models) are too coarse in some cases, as they account for the cracking state of concrete in a ...