Numerical investigation of two-dimensional Mode-II delamination in composite laminates
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Continuous-fiber ceramic matrix composites (CMCs) are of interest as hot-section components in gas turbine engines due to their refractoriness and low density relative to metallic alloys. In service, CMCs will be subjected to spatially inhomogeneous temper ...
It is known that the mechanical properties of composite materials and alloys are influenced by the intrinsic mechanical properties of their reinforcements or second phases. It is however challenging to determine such local properties, given their small siz ...
The demand for carbon/epoxy laminated composites is continuously increasing due to their high specific modulus and strength. Among them, laminates made of particularly thin layers (from t=0.015 to 0.150 mm) and called thin-ply composites are gaining in int ...
In the scope of this study, the capability of particle image velocimetry (PIV) method to monitor cracking behavior of cement-based materials was investigated. Load-crack opening width curves for beam specimens were obtained both from conventional measureme ...
2016
, ,
A novel phenomenological model taking into account the creep-fatigue interaction in composite materials’ fatigue performance is introduced in this paper. The model is based on the derivation of a master curve by using existing experimental fatigue data fro ...
2016
, ,
Large scale bridging is an important toughening mechanism in composite laminates that depends on the specimen geometry as well as the constituent materials. In this work, an iterative approach is applied to identify the effect of specimen thickness on trac ...
Elsevier2015
The fatigue behavior of adhesively-bonded glass fiber-reinforced polymer (GFRP) joints is affected by the loading sequence. Analysis of several experimental data for composite materials and adhesively-bonded composite joints showed that the loading sequenc ...
We show that chevron-notched samples offer an attractive approach to the measurement of fracture toughness in micron-scale samples of brittle materials and use the method to characterize quartz and nanocrystalline alumina. Focused ion beam milling is used ...
The mechanical behaviour of metallic materials that have a microstructure composed of a brittle phase embedded in a ductile matrix is dictated by a complex interplay of factors such as local phase properties, cohesive properties, geometrical characteristic ...
Delamination propagation in fibrous laminates is often accompanied by development of a damage zone, within which intact fibers bridge the crack faces that constitutes a major toughening mechanism. A direct experimental assessment of the crack closure tract ...
