Bemessung von Stahlbetonstützen unter Zwangsverformungen
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
This paper presents experimental results which demonstrate the important, but to date little-studied influence of surfacing on the response up to failure of orthotropic GFRP bridge decking local to concentrated loading. Four bonded deck specimens were test ...
The conversion of existing buildings, development of standards, material deterioration and detailing deficiencies have led to a need for strengthening an increasing number of concrete flat slabs against brittle punching shear failure. However, existing ana ...
The results of tests on two continuous composite beams combining a reinforced concrete (RC) beam with a layer of reinforced ultra-high performance fiber reinforced concrete (R-UHPFRC) are presented. The R-UHPFRC element acts both as a tensile membrane and ...
This paper discusses two projects on post-tensioned glass beams, performed at EPFL and DTU, respectively. In these projects small scale glass beams (length of 1.5m and 1m) are post-tensioned by means of steel threaded rods tensioned at the beam ends. The p ...
Laboratory experiments which consist of releasing dry rigid non-cohesive grains or small bricks on an unconfined chute have been designed to investigate rock avalanche propagation mechanisms and to identify parameters influencing their deposit characterist ...
This paper presents the results of an extensive experimental campaign on 16 flat-slab specimens with and without punching shear reinforcement. The tests aimed to investigate the influence of a set of mechanical and geometrical parameters on the punching sh ...
In this paper, the strength of prestressed girders with low amount of shear reinforcement or with defective anchorage is investigated by means of a test programme carried out at the Ecole Polytechnique Fédérale de Lausanne on 10 prestressed and 2 reinforce ...
Proceedings of the 9th fib International PhD Symposium in Civil Engineering2012
Bonded fiber reinforced polymers (FRPs) reinforcement systems have traditionally been found to be an efficient method for improving the lifespan of fatigued metallic structures and have attracted much research attention. Nevertheless, the performance of a ...
Flat slabs are commonly used in Switzerland but also in north America and in many European countries. Slab bridges are also a typical solution for crossing of motorways for example. In both cases, supporting a slab by columns is justified by the simplicity ...
An experimental study on a series of composite beams combining a 250 mm (9.84 in.) deep reinforced concrete (RC) element and a 50 mm (1.97 in.) thick reinforced ultra-high-performance fiber-reinforced concrete (R-UHPFRC) element is presented. The specimens ...
