Selective light induced chemical vapour deposition of titanium dioxide thin films
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
By addition of Si to a binary transition metal nitride MN (e.g. TiN, ZrN, NbN, CrN), the hardness, thermal stability and chemical inertness of films have been considerably improved. The formation of a ternary M–Si–N ternary phase is possible under specific ...
Polymeric materials suffer from chain degradation due to the absorption of ultraviolet (UV) light. Nevertheless, many polymers show excellent optical transmission properties in the visible range and are suitable replacements for glass. Coating of polymers ...
A shadow mask-evaporated pyroMEMS igniter is presented. The metallization was successfully carried out without ignition or any visible degradation of the propellant charge during evaporation. Directly depositing the Joule-heating igniter onto the propellan ...
To improve temperature durability for autoclaving of SiOx diffusion barrier coatings on polypropylene, plasma polymerized hexamethyldisiloxane (pp-HMDSO) is applied by plasma enhanced chemical vapour deposition as interlayer material and compared with resu ...
Fast hydrogen sensors based on discontinuous palladium (Pd) films on supporting polyimide layers, fabricated by a cost-efficient and full-wafer compatible process, are presented. The films, deposited by electron-beam evaporation with a nominal thickness of 1. ...
A process for the deposition of a solid layer onto a liquid is presented. The polymer poly-di-chloro-paraxylylene, also known as Parylene C, was grown on low vapour pressure liquids using the conventional low pressure chemical vapour deposition process. A ...
A slice of the Havero meteorite which belongs to the ureilite class known to contain graphite and diamond was cut and then polished as a thin section using a diamond paste. We identified two carbonaceous areas which were standing out by more than 10 pm in ...
Nanowire superconducting single photon detectors (SSPDs) [1] are characterized by very high sensitivity in the near infrared (detection efficiency η up to 30%, for a dark count rate DK of few Hz), speed (up to ∼1 GHz repetition rate) and time resolution (j ...
Two series of titania-based photocatalysts were prepared by the sputtering method, in pure Ar atmosphere at a pressure of 0.5 Pa using a vanadium target source in a direct dc mode with a discharge of 300 V. The time of deposition was varied between 1 and 1 ...
We report on the fabrication and characterization of high performance nanowire superconducting single photon detectors (SSPD) on MgO substrates. The deposition of the superconducting material (NbN) has been performed by magnetron sputtering at 400C. This d ...
