Fracture and toughening of high volume fraction ceramic particle reinforced metals
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Effects of non-uniform strains on tensile fracture of fiber-reinforced ceramic–matrix composites have not been satisfactorily explained by existing mechanics-based models. In this paper, we use an exact model of fiber fragmentation under global load sharin ...
Limited reliability of ferroelectric-based actuators restricts their use in high-performance applications, where stress-induced cracking of ferroelectric ceramics often leads to fatal failure. The main limiting factors are the relatively small fracture tou ...
We investigate processing-microstructure relationships in the production of Al2O3 particle reinforced copper composites by solidification processing. We show that during production of the composites by gas-pressure infiltration of packed Al2O3 particle pre ...
Composite material combining: - a precious metal or an alloy containing a precious metal, - and a boron-based ceramic having a melting point above that of said precious metal and a density at most equal to 4 g/cm3. ...
Fiber bridging is regularly encountered in model delamination tests of unidirectional fiber reinforced composites. However, characterization of the bridging tractions is rather difficult. One way to indirectly evaluate the bridging traction distribution is ...
Over the past decades the use of composite materials has enormously increased, especially in the aeronautical, automotive, and energy production industries. These materials allow to build lighter and larger structures which are more efficient. However, by ...
We show that elastic waves can be excited at a fracture inside a transparent sample by focusing laser light directly onto this fracture. The associated displacement field, measured by a laser interferometer, has pronounced waves that are diffracted at the ...
Fracture toughness tests are conducted at room temperature and 923 K (650 degrees C) on SENB (Single Edge Notched Bend) specimens of three different (alpha(2) + gamma ) TiAl-based alloys. One alloy is a conventional near fully lamellar Ti-45Al-2Mn-2Nb + 0. ...
This research project experimentally and numerically investigates the growth and coalescence of pre-existing voids for a wide range of stress states in a ductile matrix with a special focus on shear dominated loading conditions and presents quantitative ki ...
The study presented in this thesis aims to numerically explore the micro-mechanisms underlying rock fracture and fragmentation under dynamic loading. The approach adopted is based on the Discrete Element Method (DEM) coupled to the Cohesive Process Zone (C ...
