Innovative standstill position detection combined with sensorless control of synchronous motors
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Recent research has shown that it is possible to independently control two three-phase induction machines while supplying them via a single five-leg voltage source inverter (VSI). In such a two-motor drive system one phase of each motor is connected to a c ...
Synchronous motors require sensors in order to control these devices in speed and/or position. Basically, the auto-commutation needs 3 sensors for a 3-phase type actuator. In micro-motors, as there is no more room to place the sensors, self-sensing approac ...
Ieee Service Center, 445 Hoes Lane, Po Box 1331, Piscataway, Nj 08855-1331 Usa2007
Application of power electronics in variable speed electric drives enables utilization of ac machines with a phase number higher than three. It then becomes possible to use the additional degrees of freedom, available in multi-phase systems, to control oth ...
MMS design allowing to move several cabins vertically, without counterweights. The vertical motion is performed with linear synchronous motors having stators distributed along the shafts and supplied by sectors. A simplified analytic approach developped at ...
This paper presents a Miniature Aerial Vehicle (MAV) capable of hands-off autonomous operation within indoor environments. Our prototype is a Quadrotor weighing approximately 600g, with a diameter of 550mm, which carries the necessary electronics for stabi ...
The paper presents a method to determine hysteresis losses in synchronous permanent magnet (M) slotless motors. The method comprises four steps: (1) experimental determination of the B-H loop, () analytical modeling of the B-H loop by applying different mo ...
Ultrasonic Motors are drive systems used in a lot of industrial applications notably because of their advantages i.e. no audible noise, compact size and fast response. Therefore, this technology has been chosen for the design of a new type of actuator for ...
The goal of this project is to develop and build an electric motor to drive the inertia wheel of the SwissCube satellite. This system should provide angular stability to the satellite and allow its control. The operational speeds range from 5000 to 11 000 ...
This project was carried out at Overview Ltd., a London company which specialises in high precision video-surveillance equipment. Overview produces devices that include a camera driven by two stepper motors, and an image-processing unit. Magnetic encoders ...
This paper describes a new method to estimate the standstill position of permanent-magnet synchronous motors (PMSMs). The method is based on the anisotropic properties of permanent magnets and is therefore referred to as a magnetic anisotropy method (MAM). ...
