Influence of microstructure on oxygen transport in perovskite type membranes
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Sintering aids or dopants have often been used successfully to limit the grain growth of alumina during sintering. Recently codoping of alumina with transition elements has been reported to produce additional effects in comparison to single doping in enhan ...
Pure and barium titanate (BT) powders doped with different lanthanum concentration were prepared by the polymeric precursor method (Pechini process) which was carried out as a three-stage process from organometallic complexes. Sintering of pressed powders ...
Production of transparent ceramics has become a topic of resurgent interest in recent years, with its promise of near-net shaping appealing to applications ranging from biomedicine to solar energy. However, the mechanisms governing ceramic transparency, tr ...
Nanocrystalline (Y0.7Gd0.3)(2)O-3 powder, synthetised via polymer complex solution method, was compacted into 25 pellets applying high pressures (173-867 MPa) for 30 s that were subsequently sintered at different temperatures (800-1400 degrees C) for 18 h. ...
Metal matrix composites (MMCs) comprising nano/microcrystalline matrices and reinforcements exhibit impressive mechanical behaviors derived by exploiting the size effects due to development of geometrically necessary dislocations. In such nanostructured MM ...
According to various studies, Grain Boundary Engineering (GBE) is likely to enhance mechanical properties of polycrystalline materials. The present investigation highlights some relationships between thermomechanical process (TMP) parameters of a commercia ...
A relaxation peak has been observed in the internal friction spectrum of 18-carat AuAgCu yellow gold alloys at about 750K for 0.5Hz. It is related to the presence of grain boundaries, since it is absent in the spectrum of single crystals. For the 14-carat ...
Trans Tech Publications Ltd, Laublsrutistr 24, Ch-8717 Stafa-Zurich, Switzerland2012
Recent experimental investigations show that large-area samples of graphene tend to be polycrystalline. Physical properties of such samples are strongly affected by the presence of intrinsic topological defects of polycrystalline materials-dislocations and ...
Fe-18CrWTi ODS steels are developed by CEA for the SFR generation IV program. The powders of a Fe-18CrWTi alloy reinforced by Y2O3 by mechanical milling have been annealed at 850 °C, 1100 °C and 1300 °C and their microstructure has been studied by SEM and ...
A method is presented for the simultaneous measurement of relative grain boundary energy and all five macroscopic grain boundary degrees of freedom in leaded copper. When compared to the Wynblatt–Takashima model, results suggest a lowered boundary energy w ...
