Effects of neutron irradiation on the microstructure and mechanical properties of the heat affected zone of stainless steel welds
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The dynamic compression responses of dry quartz sand are tested with a modified spilt Hopkinson pressure bar (MSHPB), and the quasi-static compression responses are tested for comparison with a material testing system. In the experiments, the axial stress- ...
Zirconium is always present in Ni base superalloys as it enhances their creep properties. In the present study, the influence of very small Zr additions, 100–400 ppm, i.e. 0.01–0.04 wt.%, on hot tearing of IN738LCsuperalloy is experimentally investigated u ...
The microstructural changes occurring during drawing and ageing in pearlitic steel wires have been studied using the thermoelectric power (TEP) measurements combined with atom probe tomography (APT) and differential scanning calorimetry (DSC). APT analysis ...
Micro-compression experiments were carried out on micro-pillars, with nominal diameter of 10 mu m and height 20 mu m, and fabricated from a high-chromium tempered martensitic steels developed for nuclear applications. An analytical method was proposed to c ...
Twinning is an important deformation mode in lightweight Mg alloys, but the mechanisms of nucleation and growth of twins and their interactions with solutes remain largely unresolved. Here, a new model for thermally-activated, stress-driven growth of twin ...
This poster shows simulation results of trasngranular fracture percentage in the ceramic microstructure under tensile loading. Moreover, the crack face roughness was investigated for microstructures with different grain sizes. ...
Due to the high homologous temperature and fast cooling rates, the microstructures of SnAgCu (SAC) solders are in a meta-stable state in most applications, which is the cause of significant microstructural evolution and continuous variation in the mechanic ...
The a/c domain pattern of tetragonal PbZr0.10Ti0.90O3 thin films under tensile misfit strain is investigated by piezoresponse force microscopy and X-ray diffraction. The results show a hierarchical ordering of the dense a/c domain structure into larger sup ...
In the quest of the structural materials for the future fusion reactor, it has been shown that ferritic/martensitic (F/M) steels are very promising candidates, with a good radiation resistance in terms of damage accumulation in the microstructure relative ...
Oxide dispersion strengthened (ODS) ferritic/martensitic (F/M) steels are promising materials for high temperature applications. The hardening limits from room temperature to 1000 degrees C of one of such steel, ODS EUROFER97, together with the impact of t ...