Effects of neutron irradiation on the microstructure and mechanical properties of the heat affected zone of stainless steel welds
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Microstructures in serpentine samples recovered from deformation experiments performed at high pressure (1-8 GPa), high temperature (150-500 degrees C), and laboratory strain rates (4 10(-4)-10(-6)s(-1)) were studied using transmission electron microscopy ...
The findings of the EU 'Materials Assessment Group' (MAG), within the 2012 EU Fusion Roadmap exercise, are discussed. MAG analysed the technological readiness of structural, plasma facing and high heat flux materials for a DEMO concept to be constructed in ...
Various thermo-mechanical treatments were applied to refine and homogenise grain size and improve mechanical properties of hot-isostatically pressed (HIP) 14%Cr ODS ferritic steel. The grain size was reduced, improving mechanical properties, tensile streng ...
Five different grain sizes are produced in 0.17 wt% carbon steel using varying rates of cooling from austenitization temperatures. Controlled furnace cooling from 1100 °C and 950 °C produces coarse ferrite grains of 40 µm and 32 µm diameter, respectively, ...
Grain boundaries in epitaxial graphene on the SiC(000 (1) over bar) substrate are studied using scanning tunneling microscopy and spectroscopy. All investigated small-angle grain boundaries show pronounced out-of-plane buckling induced by the strain fields ...
Molecular dynamics simulation is used to study the formation of the a(0) < 1 0 0 > binary dislocation junction in body-centered cubic Fe. Results show that under an applied strain two intersecting 1/2 a(0) < 1 1 1 > dislocations, one mobile edge and one im ...
This work is focused on the evolution of the microstructure of Inconel 718 during multi-pass forging processes. During the forming process, the material is subjected to several physical phenomena such as work-hardening, recovery, recrystallization and grai ...
This work is focused on the evolution of the microstructure of Inconel 718 during multi-pass forging processes. During the forming process, the material is subjected to several physical phenomena such as work-hardening, recovery, recrystallization and grai ...
CROCUS is a zero power (100 W) reactor of the Laboratory for Reactor Physics and Systems Behavior (LRS) at the Swiss Federal Institute of Technology, Lausanne (EPFL). It is used for teaching and research purposes. Its modeling has relied so far on diffusio ...
We present a deformable cell culture system based on dielectric elastomer actuator (DEA). Understanding how the mechanical environment can affect cells functions could lead to significant advances in diseases diagnosis and drug development. Most available ...
