Footprints of deformation mechanisms during in-situ x-ray diffraction
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Spalling in tantalum has been observed in an experiment aiming at testing an antiproton production target prototype at CERN’s HiRadMat Facility. The experiment consisted in impacting 47 intense and high-energy proton beams onto a target equipped with ten c ...
Dynamic recrystallization (DRX) often takes place during hot deformation of metallic materials, which then exerts significant influence on the final microstructures and mechanical properties of the formed components. A considerable number of published pape ...
Developing hydrogels with optimal properties for specific applications is challenging as most of these properties, such as toughness, stiffness, swelling or deformability, are interrelated. The improvement of one property usually comes at the cost of anoth ...
The deformation-induced martensitic transformation observed in specific materials can enhance their mechanical properties or result in functional properties. For example, the transformation induced plasticity (TRIP) effect results in a good combination of ...
Spurred by developments in digital fabrication, there has been an increase in the application of the Integral Mechanical Attachment (IMA) technique in timber plate structures. Despite its increase in popularity, there have been very few systematic investig ...
A multi-phase Ti-6Al-4V prepared by electron beam melting and thermal post treatments has been shown to exhibit increased strength and ductility over standard wrought or hot isostatic pressed Ti-6-Al-4V. The mechanical improvements are due to a prolonged, ...
The mechanical properties due to solid solution strengthening are explored within the single phase face-centered cubic (fcc) domain of the Co-Cr-Fe-Mn Ni high entropy alloy (HEA) system. This is achieved by combining an efficient and reproducible metallurg ...
Mg and Ti alloys are attractive materials for structural applications in the transportation and biomedical industries due to their high strength-to-weight ratios. However, due to their hexagonally close-packed (HCP) lattice structure, they exhibit poor for ...
Dislocation emission from a crack tip is a necessary mechanism for crack tip blunting and toughening. A material is intrinsically ductile under Mode I loading when the critical stress intensity KIe for dislocation emission is lower than the critical s ...
Strain Hardening Ultra High Performance Fiber Reinforced Concretes (SH-UHPFRC) are cementitious materials with exceptional mechanical properties and outstanding durability making them ideal materials for rehabilitation, for the improvement of load carrying ...
