Design of high data rate, passive, far-field RFID tags in CMOS technology

Radio frequency identification (RFID) is an exciting, rapidly growing, multi-disciplinary field with emerging technologies and applications. Today RFID is a generic term for technologies that use radio frequencies to automatically identify people or objects. In a typical RFID system, digital information is transferred between a base station and movable objects, using wireless communication techniques. The base station, called reader, is usually a complex device connected to a host computer or network. The movable objects are simple, inexpensive devices called tags, which are attached to the people or objects to identify. In far-field RFID, the coupling mechanism between reader and tag is based on the propagation of electromagnetic waves. Passive, far-field tags don't contain a power source, but rely on wireless power transmission instead; they are powered by the rectification of the radio signal sent by the reader. These tags send data to the reader by changing the load connected to their antenna in a coded manner, a technique known as backscatter modulation. As of today (2009), passive RFID tags that are commercially available are typically optimized for operating at a large distance from the reader. This inevitably comes at the cost of a low data transfer rate. A new field in RFID is currently emerging, which focuses more on data rate than on operating range. The development of such high data rate RFID tags, communicating at several megabit per second (Mbps), opens the way to a variety of promising applications in the areas of "ambient intelligence" and "the internet of things". A typical example is the wireless memory tag, which consists in a passive, far-field RFID tag containing high capacity, high speed nonvolatile memory. Such tags enable to store multimedia content (video, music...) that can be downloaded by the user in a few seconds. In the near future, this will probably become a popular new distribution method for various digital products. Designing such tags involves a number of challenges. Because they communicate at high data rate, they consume a significant amount of power. Particular care must be taken in order to optimize the efficiency of wireless power transmission, so that the tags can reach a decent operating range. This thesis work discusses how various tag building blocks, such as the antenna and the rectifier, impact the efficiency. The principle of wireless voltage regulation is introduced. It allows to further improve the efficiency by lowering the losses not only in the tag, but also in the reader. Various experimental results are provided, which show amongst other things that the power emitted by the reader can be reduced at least by a factor of four. Realizing passive, far-field tags that can transfer information at high data rate with backscatter modulation is not a trivial task. This work aims to determine how to maximize the useful backscattered power, which conveys information. Because the reader has a finite sens