The Laguerre model for grain growth in three dimensions
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Recrystallization, which can occur dynamically or statically, is an important phenomenon causing microstructure changes in deformed metals and therefore affecting the properties of the material. Even though extensive investigations have been carried out on ...
Grain-boundary character distributions (GBCDs) were determined for spark plasma sintered Y- and La-doped aluminas prepared at temperatures between 1450 degrees C and 1600 degrees C. La doping leads to grain boundaries that adopt (0001) orientations 3.7 tim ...
A high-temperature anelastic relaxation peak in the mechanical loss spectrum of 18-carat yellow gold polycrystals is analysed and interpreted as due to grain boundary sliding accommodated predominantly by elastic deformation of the grains. The characterist ...
Under certain circumstances abnormal grain growth occurs in Nickel base superalloys during thermomechanical forming. Second phase particles are involved in the phenomenon, since they obviously do not hinder the motion of some boundaries, but the key parame ...
Heavily deformed 18-carat yellow gold samples show a recrystallization peak at 700 K during the first heating. The mechanical loss spectrum of polycrystals shows a relaxation peak at about 780 K, which is absent in single crystals made from the same alloy. ...
Microstructure evolution has been studied in the nickel-based superalloy PER®72 subjected to hot torsion, to annealing below the primary γ' solvus temperature and to annealing at a supersolvus temperature, with a special emphasis on grain size and twin con ...
An equilibrated polycrystalline material is considered, containing a small fraction of void space (melt or vapor), for which the crystals are above their roughening transition against this medium. The grain boundaries are approximated to have equal free en ...
The paper describes a new model of discontinuous dynamic recrystallization (DDRX) which can operate in constant or variable thermomechanical conditions. The model considers the elementary physical phenomena at the grain scale such as strain hardening, reco ...
The influence of the quench rate after solution treatment on the bendability of AA6016 aluminum alloy sheets was investigated. Crack initiation during bending tests is found to be independent of quench rate whereas crack propagation is decreased after rapi ...
An in situ annealing stage has been developed in-house and integrated in the chamber of a Scanning Electron Microscope equipped with an Electron BackScattered Diffraction system. Based on the Joule effect, this device can reach the temperature of 1200°C at ...
