Etching of platinum thin films with dual frequency ECR/RF reactor
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The project focuses on etching properties of the atomic layer deposition (ALD) of Al2O3. For this purpose, etching processes such as plasma etch with sulfur hexafluoride (SF6), gas etch with xenon difluoride (XeF2), wet etch with MIF developer (726 MIF) as ...
2023
During this project, the microfabrication of Hafnium Carbide (HfC) was investigated. Multiple tools were considered and tested for their compatibility and effectiveness when working with HfC. The main method of choice for the machining of HfC thin films wa ...
HfC has been very under-investigated due to its rarity and synthesising difficulty. Its potential for MEMS and NEMS applications has been recognized and is the object of an ongoing feasibility study for production since 2022. We continue on this impulse by ...
2023
The objective of this semester project is the fabrication of suspended piezoelectrically transduced resonators and to test and compare the quality of the piezoelectric layer using different processes and parameters. A functional fabrication process by lift ...
2023
One approach to overcome the high contact resistance between 3D metals and 2D materials/heterostructures is employing edge contacts [1]. A low-resistance edge contact on boron nitride/graphene/boron nitride heterostructure using photolithography has been d ...
2018
, ,
We report on single crystal diamond micro-disk resonators fabricated in bulk chemical vapor deposition diamond plates (3 mm x 3 mm x 0.15 mm) using a combination of deep reactive ion etching and Focused Ion Beam (FIB) milling. The resulting structures are ...
We present an aspect ratio dependent etching (ARDE) method, utilizing the Bosch dry etching process of silicon, to create the optimal silicon master microstructures for replication of polydimethylsiloxane (PDMS) microchannels that allow immobilizing C. ele ...
We report on the increase in optical quality factor of a suspended single crystal diamond micro-disk resonator by thermal annealing. The resonators are fabricated by Deep Reactive Ion Etching (DRIE) to obtain circular pillars in bulk single crystal diamond ...
A method for performing a post processing pattern on a diced chip having a foot-print, comprises the steps of providing a support wafer; applying a first dry film photoresist to the support wafer; positioning a mask corresponding to the footprint of the di ...
We have experimentally studied the variation in electrical resistance of flexible platinum lines patterned on polyimide foil when they are subjected to circular bending constraints. The lines were patterned by means of standard photolithography and sputter ...
