Structural investigation of thin SrTiO3 films grown on MgO and LaAlO3 substrates
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
PbTiO3 thin films were epitaxially grown on (001) KTaO3 single crystal substrates by metalorganic chemical vapor deposition. The coherent epitaxial growth introduced a large in-plane tensile strain to the PbTiO3 film. This tensile strain increased T-C and ...
Ferritic/martensitic steels are candidate materials for fusion reactor structural components, liquid metal containers of spallation neutron sources, and accelerator driven systems, with good radiation resistance and thermo-mechanical properties. However, e ...
The a/c domain pattern of tetragonal PbZr0.10Ti0.90O3 thin films under tensile misfit strain is investigated by piezoresponse force microscopy and X-ray diffraction. The results show a hierarchical ordering of the dense a/c domain structure into larger sup ...
Thanks to its high refractive index contrast, band gap, and polarization mismatch compared to GaN, In0.17Al0.83N layers lattice-matched to GaN are an attractive solution for applications such as distributed Bragg reflectors, ultraviolet light-emitting diod ...
We report for the first time the results of tensile stress testing of thin film conductive structures patterned by stencil lithography on a PI substrate. The goal of this investigation is to determine the effects that mechanical deformation occurring in re ...
Reinforced concrete being the most applied construction material today performs very well in most applications but still lacks durability under severe environmental conditions. Especially existing structures built decades ago show degradation. Using Ultra- ...
We calculate band-to-band radiative transition rate spectra in pure Ge as functions of applied tensile strain, heavy doping, charge injection density, and temperature. Direct and indirect phonon-assisted transitions are considered. Deformation potential th ...
Interdigitated electrode (IDE) systems with lead zirconate titanate (PZT) thin films play an increasingly important role for two reasons: first, such a configuration generates higher voltages than parallel plate capacitor-type electrode (PPE) structures, a ...
Institute of Electrical and Electronics Engineers2012
Hot tearing is one of the most severe defects observed in castings, e.g. in billets or sheet ingots of aluminum alloys produced by DC casting. It is due to both tensile strains and a lack of interdendritic feeding in the mushy zone. In order to predict thi ...
Strain Hardening Ultra High Performance Fiber Reinforced Concrete (SH-UHPFRC) were used successfully over the last 8 years in numerous cast in place rehabilitation applications as long lasting waterproofing layers (20 to 30 mm thickness) and, combined with ...
