Ferroelectric properties of an epitaxial lead zirconate titanate thin film deposited by a hydrothermal method below the Curie temperature
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Erbium-doped amorphous aluminum oxide layers deposited on Si or oxidized silicon substrates are promising construction pieces for future monolytic integrated optoelectronics devices. In a novel high-vacuum chemical vapor deposition setup the alumina films ...
Radio frequency (RF) filters based on bulk acoustic wave resonances in piezoelectric thin films have become indispensable components in mobile communications. The currently used material, AlN, exhibits many excellent properties for this purpose. However, i ...
Strontium barium niobate (SrxBa1-xNb2O6, shortly SBN) is a solid solution system with tetragonal tungsten bronze crystal structure. It exhibits a ferroelectric phase with only one polar axis and a transition temperature depending on the Sr/Ba ratio. This t ...
The capability of switching the spontaneous polarisation under an applied electric field in ferroelectric materials can be exploited for the use in low power, non-volatile, re-writable memory devices. Currently available commercially is ferroelectric rando ...
Lithium niobate is a key material for photonics with applications in optical modulators and light frequency converters. Present lithium niobate optical devices are realized in bulk lithium niobate single crystals while interests in higher integration and a ...
Large area plasma-enhanced chemical vapor deposition of thin films such as silicon nitride or amorphous silicon is widely used for thin film transistor fabrication in the flat panel display industry. A numerical three-dimensional model to calculate the dep ...
Using pulsed-laser deposition, a two-step growth technique was applied to epitaxial SrTiO3 (STO) thin films on LaAlO3 substrates providing a way to obtain an effective strain relaxation in these films otherwise strained due to lattice mismatch between film ...
Pb(Zr, Ti)O-3 (PZT) is an interesting material for bulk acoustic wave resonator applications due to its high electromechanical coupling constant, which would enable fabrication of large bandwidth frequency filters. The major challenge of the PZT solid solu ...
Nanowire superconducting single photon detectors (SSPDs) [1] are characterized by very high sensitivity in the near infrared (detection efficiency η up to 30%, for a dark count rate DK of few Hz), speed (up to ∼1 GHz repetition rate) and time resolution (j ...
DC reactive magnetron sputtering was used for the deposition of Zr–Si–N thin films. Four series of samples have been deposited at various substrate temperatures TS: 300 K, 510 K, 710 K and 910 K. Depending on TS, different N2 partial pressures pN2 were req ...
