Initial-Stage Hot-Pressing Of Monosized Ti And 90-Percent Ti-10-Percent Tic Powders
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Silicon nitride based ceramics (SiAlONs); tetragonal polycrystalline zirconia (3Y‐TZP); alumina and their composites reinforced with different amount of multi‐ walled carbon‐nanotubes (CNTs) have been processed by Spark Plasma Sintering (SPS). High tempera ...
The improvement of the mechanical properties of carbon nanotube reinforced polycrystalline yttria-stabilized zirconia (CNT-YSZ) was questionable in earlier investigations due to several difficulties for processing of these composites. In the present articl ...
The metastable high pressure ReB2-type hexagonal OsB2 bulk ceramics was produced by spark plasma sintering. The phase composition, microstructure, and mechanical behavior of the sintered OsB2 were studied by X-ray diffraction, optical microscopy, TEM, SEM, ...
The long term fixation of biomedical implants constitutes an issue in the clinical praxis. Implant fixation can be improved by functionalizing its surface. In fact, the tissue response around an implant is conditioned by its surface morphological and chemi ...
Master sintering curve (MSC) was used as a practical approach to analyse the sintering behavior of an ultrafine alumina powder. Non-isothermal sintering was carried out at three heating rates. The concept of the MSC has been used to investigate the effect ...
Topographic nanostructuring of surfaces is a promising concept, in particular to improve the bio-integration of titanium orthopedic implants. In this context, a new method for the nanostructuring of anodised titanium surfaces was developed. Ordered topogra ...
Over the last century, the constant quest to improve the mechanical properties of ceramics has ultimately led to the appearance and production of transparent ceramics. Indeed, microstructural refinement and reduction of the residual porosity after sinterin ...
The overall aim of this thesis has been to assess the potential of latex-based technologies for the preparation of polymer/clay nanocomposites. The key feature of latex-based technologies is that they offer the possibility of improved control of the final ...
Multi-walled carbon nanotube (MWCNT)/nanostructured zirconia composites with a homogenous distribution of different MWCNT quantities (ranging within 0.5-5 wt.%) were developed. By using Spark Plasma Sintering we succeeded in preserving the MWCNTs firmly at ...
Purpose – Since pulsed lasers are mainly used in selective laser sintering (SLS) – contrarily to selective laser melting (SLM) – only the exterior of the powder particles is molten while their core stays solid. The purpose of this paper is to investigate t ...
