Redox Targeting of Insulating Electrode Materials: A New Approach to High-Energy-Density Batteries
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Sodium-nickel-chloride batteries have a proven track record for backup power applications, but also show great potential for large-scale stationary electricity storage currently dominated by lithium-ion batteries. While lithium-ion cells rely on critical c ...
Although Al-air batteries are expected to be the candidates for energy conversion systems in renewable energy market due to the higher energy density, richer reserves, and lighter mass of Al metal, the anode self-discharge is seen as a notorious issue that ...
The energy transition towards a carbon-neutral and sustainable economy is one of the greatest challenges of the 21st century to combat global warming and pollution. The decarbonization process is affecting every sector of the economy (electricity, transpor ...
One of the main challenges for certain electricity production technologies (e.g. renewables) is the capability to supply energy according to the demand. It follows that storing energy is a possible solution to the inadequacy between production and demand. ...
Electric vehicles (EVs) have gained widespread attention in recent years as the dominant strategy for curbing CO2 emissions through transport electrification. Lithium-ion batteries (LIBs) are currently the most suitable and almost exclusively employed ener ...
Lithium-ion batteries are widely implemented as energy storage devices due to their high energy density and low cost. They enabled modern portable electronics and electric ve-hicles, and are key to manage the integration of intermittent renewable electrici ...
Rechargeable sodium (Na) metal batteries (SMBs) provide an alternative energy-dense, low-cost energy storage system beyond prevailing Li-ion technologies. However, their practical deployment requires the performance evaluation of Na anodes on the device le ...
In this work, several carbon-decorated Na3V2(PO4)(3) materials (NVP@C-750/800/850) are successfully fabricated using a solgel approach and subsequent heat treatment. When NVP@C-800 is used as a cathode, it shows an ultralong cycle life (2000 cycles) at a h ...
The dielectric elastomer actuator (DEA) is a technology known to potentially provide high energy density (0.3 - 0.4 J.cm(-3)). However, in the literature, few demonstrations have been done to evaluate this figure. To well understand the ability of this tec ...
The Mn(III)/Mn(II) redox couple with a standard potential of +1.51 V vs . SHE has drawn interest for the design of V/Mn redox flow battery (RFB). However, Mn(III) disproportionation leads to a loss of capacity, an increase of pressure drop and electrode pa ...
