Dimitrios LignosProf. Lignos joined the École Polytechnique Féderale de Lausanne (EPFL) in 2016 from McGill University in Canada where he was a tenured Associate Professor and a William Dawson Scholar for Infrastructure Resilience. He holds a diploma (National Technical University of Athens, NTUA, 2003), M.S. (Stanford University, 2004) and Ph.D. (Stanford University, 2008). In addition, he was a post-doctoral scientist at Stanford University (2009) and in Kyoto University (2010). Prof. Lignos teaches graduate and undergraduate courses in seismic design, nonlinear behaviour of steel and composite structures as well as supplemental damping systems, Structural Stability, Nonlinear Analysis and Performance-based Earthquake Engineering. His awards for teaching, research and service in Civil Engineering include the 2011 Outstanding Teaching Award (Faculty of Engineering, McGill University), as well as the Outstanding reviewer (2012, 2013) award from ASCE, the 2013 State-of-the-Art in Civil Engineering Award by ASCE and the 2014 Christophe Pierre Award for Research Excellence - Early Career. Just recently, he received the 2019 Walter L. Huber Civil Engineering Research Prize from ASCE for significant contributions in developing state of the art methods to simulate extreme limit states in steel structures.Prof. Lignos is a member of ASCE and the Earthquake Engineering Research Institute. He acts as an Associate Editor for Metal Structures and Seismic Effects of the ASCE Journal of Structural Engineering. He joined the Editorial Board of Earthquake Spectra and Earthquake Engineering and Structural Dynamics International journals. He serves as an acting member of the CEN/TC 250/SC 8/WG 2 and has been selected as a member of the Project Team (PT2) for the Eurocode 8-Part 1 Current Revisions for Steel and Composite Structures. He is also a member of the Canadian Standards Association (CSA) S16 technical committee for Steel Structures. Prof. Lignos is involved as a NEHRP consultant in numerous research-to-practice projects related to the behaviour and nonlinear modelling and analysis of structures applicable to the engineering practice through the Applied Technology Council (ATC). Detailed Curriculum Vitae (last update September 2018)
Paolo RicciPaolo Ricci earned his masters degree in nuclear engineering at the Politecnico di Torino, Turin (Italy) in 2000. His doctoral studies were conducted at the Los Alamos National Laboratory, with focus on kinetic simulation of magnetic reconnection in the Earth's magnetotail. He spent two-and-a-half years as a postdoctoral researcher at Dartmouth College's Department of Physics and Astronomy, where he worked on gyrokinetic simulations of the Z pinch. He joined the EPFL's Swiss Plasma Center (SPC), as a EURATOM fellow in 2006, was named Tenure Track Assistant Professor in June 2010, and Associate Professor in August 2016. He is at the head of the SPC theory group. Paolo Ricci is the recipient of the 2016 Section de Physique Teaching Prize and of the 2021 Craie d'Or award from the EPFL physics bachelor students.
François GallaireNé le 26 février 1975, François Gallaire obtient, en 1998, le diplôme dingénieur de lEcole Polytechnique à Paris et, en 1999, un master en « Physique des liquides » à lUniversité Pierre et Marie Curie, toujours à Paris. Il rejoint ensuite le Laboratoire dhydrodynamique (LadHyX) à lEcole polytechnique où il soutient, en 2003, une thèse sur le thème des instabilités des jets tournants et sur le contrôle de léclatement tourbillonnaire sous la direction de Jean-Marrc Chomaz. En 2003, il est nommé chargé de recherche au CNRS au Laboratoire J.A. Dieudonné de lUniversité de Nice Sophia-Antipolis.En 2009, il rejoint l'EPFL pour y fonder le laboratoire des mécanique des fluides et instabilités (LFMI). Ses recherches se concentrent sur létude des propriétés fondamentales de stabilité des écoulements de fluides et sont guidées par les applications réelles, en particulier le contrôle des écoulements. Récemment, il a réalisé dimportantes contributions dans les domaines de la micro-fluidique (lanalyse de la manipulation par laser dune goutte dans un micro-canal) et la dynamique des bio-fluides (le descriptif mécanique de lanévrisme de laorte abdominale).
Colin Neil JonesColin Jones is an Associate Professor in the Automatic Control Laboratory at the Ecole Polytechnique Federale de Lausanne (EPFL) in Switzerland. He was a Senior Researcher at the Automatic Control Lab at ETH Zurich until 2011 and obtained a PhD in 2005 from the University of Cambridge for his work on polyhedral computational methods for constrained control. Prior to that, he was at the University of British Columbia in Canada, where he took a BASc and MASc in Electrical Engineering and Mathematics. Colin has worked in a variety of industrial roles, ranging from commercial building control to the development of custom optimization tools focusing on retail human resource scheduling. His current research interests are in the theory and computation of predictive control and optimization, and their application to green energy generation, distribution and management.
Nico de RooijNico de Rooij is Professor Emeritus of EPFL and previous Vice-President of CSEM SA. He was Professor of Microengineering at EPFL and Head of the Sensors, Actuators and Microsystems Laboratory (
SAMLAB
) from 2009 to 2016. At
CSEM SA
he was responsible for the EPFL CSEM coordination from 2012 to 2016. His research activities include the design, micro fabrication and application of miniaturized silicon based sensors, actuators, and microsystems. He authored and coauthored over 400 published
journal papers
in these areas.
He was Professor at the University of Neuchatel and Head of the Sensors, Actuators and Microsystems Laboratory (SAMLAB) from 1982 to 2008. Since October 1990 till October 1996 and again from October 2002 until June 2008, he has been the director of the Institute of Microtechnology of the University of Neuchatel (IMT UniNE). He lectured at the Swiss Federal Institute of Technology, Zurich (ETHZ), and since 1989, he has been a part-time professor at the Swiss Federal Institute of Technology, Lausanne (EPFL). He has been appointed Vice-President of the CSEM SA in February 2008 and headed the newly created Microsystems Technology Division of CSEM SA, from 2008 until 2012. He was Director of EPFL's Institute of Microengineering (EPFL STI IMT) from 2009 to 2012, following the transfer of IMT Uni-NE to EPFL.
Dr. de Rooij is a Fellow of the IEEE and Fellow of the Institute of Physics (UK). He recieved the IEEE
Jun-Ichi Nishizawa Gold Medal
, the Schlumberger Prize as well as the
MNE Fellow Award 2016
. He was awarded a Visiting Investigatorship Program (VIP) in MEMS/NEMS Systems by the
A*STAR Science and Engineering Council (SERC)
, Singapore, hosted by
SIMTech
, for the period 2005-2008.
Prof. de Rooij is Corresponding Member of the
Royal Netherlands Academy of Arts and Sciences
and Individual Member of the
Swiss Academy of Engineering Sciences
.
He has been serving on the Editorial Boards of the
IEEE/ASME Journal of Microelectromechanical Systems (IEEE JMEMS)
,
the IEEE proceedings
,
the Journal of Micromechanics and Microengineering, JM & M,
,
the Sensors and Actuators
,and
Sensors and Materials
. He was Member of the Information and Communication technology jury of the BBVA Foundation Frontiers of Knowledge Awards from 2009 to 2012.
Dr. de Rooij is (or was) Member of numerous international steering committees of conference series as well as
technical paper review panels including the steering committee of the International Conference on Solid-State
Sensors and Actuators and of Eurosensors. He acted as European Program Chairman of Transducers '87 and General Chairman of Transducers '89, Montreux, Switzerland.
He has supervised more than 70 Ph.D. students, who have successfully completed their
Ph.D. thesis.
He received his M.Sc. degree in physical chemistry from the State University of Utrecht, The Netherlands, in 1975, and a Ph.D. degree from Twente University of Technology, The Netherlands, in 1978. From 1978 to 1982, he worked at the Research and Development Department of Cordis Europa N.V., The Netherlands.
Yves WeinandBiography
Architect and civil engineer, Prof. Dr. Yves Weinand is one of the most recognised researchers in the field of contemporary wood construction. Founder of the Bureau d'Etude Weinand, he has, since 1996, designed and worked on many emblematic wooden buildings, such as the Saint Loup Chapel, the new Vaudois Parliament or, more recently, the Timber Pavilion of Vidy in Lausanne. His fundamental research questions the technical and static possibilities of wooden materials. The interdisciplinary exploration carried out at the EPFL's Laboratory for Timber Constructions (Ibois), of which he is director, concerns wood in all its aspects, from round wood to manufactured wood. The recent research carried out at Ibois on free structures with wood-wood connections (without screw nor glue) has been the subject of several technological transfers, and stands as tangible proof of new possibilities for wood construction. Yves Weinand is currently working on a large-scale project for a hall for the head office of a joinery in Luxembourg, consisting of a succession of arches with spans of 22.5 to 53.7m, entirely assembled in wood ). Through new innovative approaches, the ambition of his research is to develop a new generation of renewable and ecological wooden construction.He is regularly invited to present his work at international symposia on timber construction.
Fields of expertise
Architectural designTimber structuresDigital FabricationRobotic AssemblyStructural Wood mechanicsIntegrally Attached Timber plate structures
Distinctions
2012 Grand Prix d'Architecture de Wallonie
2014 Best Paper Award, Advances in Architectural Geometry conference. (IBOIS team)
2017 Medal for Research and Technique by the Academy of Architecture. 2018 Mention Régionale, Prix Lignum for the Timber Pavilion of Vidy-Lausanne
2019 "Disctinction Bois 2019" for the Nouveau Parlement vaudois.2019 Grand Prix d'Architecture de Wallonie____________________________________________________________________________
Selected publications
Les Cahiers de l'Ibois/ Ibois Notebooks 1, F. Fromonot, S. Berthier, Y. Rocher, publication directors: Y. Weinand et C. Catsaros, 2020 EPFL Press Le Pavillon en bois du Théâtre de Vidy, under the direction of Yves Weinand; V. Baudriller, J. Gamerro, M. Jaccard, C. Robeller; 2017, PPURAdvanced Timber Structures - Architectural Designs and Digital Dimensioning, Y. Weinand, 2017, Birkhaüser, publié en trois langues (french : Structures Innovantes en Bois (2016); german : Neue Holztragwerke - Architektonische Entwürfe und digitale Bemessung (2017)Grubenmann Project / Projekt Grubenmann, Y. Weinand, 2016, Stiftung Grubenmann-SammlungTimber Project: Nouvelles formes d’architectures en bois, Y. Weinand, 2010, PPURArchitexto, Y. Weinand and D. Darcis, 2009, Editions Fourre-Tout, LiègeLe bois soudé, B. Stamm and Y. Weinand, 2004, Architecture Bois & DépendanceNew Modeling - projeter ensemble, Y. Weinand, 2003, PPUR 