Concept

Shear force

Publications associées (31)

Birth and ascent of buoyant hydraulic fractures

Brice Tanguy Alphonse Lecampion, Andreas Möri

Hydraulic fracturing treatments are often used in petroleum and other industries to increase the permeability of rock formations and occur naturally as magmatic intrusions. The resulting fractures, propagating perpendicularly to the minimum in-situ stress ...

2023

3D printing of elastomeric mechanical sensors designed for human motion monitoring

Ryan Mitchell van Dommelen

In this thesis several advances are made to the emerging field of 3D printed mechanical sensors. Techniques and processes were developed to enable the integration of highly conductive, and capacitive and piezoresistive sensing features embedded within 3D p ...

EPFL2022

Multimode Hydraulically Amplified Electrostatic Actuators for Wearable Haptics

Herbert Shea, Ronan Julien Hinchet, Edouard Franck Vincent Gustave Leroy

The sense of touch is underused in today’s virtual reality systems due to lack of wearable, soft, mm-scale transducers to generate dynamic mechanical stimulus on the skin. Extremely thin actuators combining both high force and large displacement are a long ...

2020

Delicate yet strong: characterizing the electro-adhesion lifting force with a soft gripper

Herbert Shea, Jun Shintake, Vito Cacucciolo

Compliant grippers are one of the most promising soft robotic devices for industrial tasks. Soft grippers dramatically simplify grasping control because the gripper automatically conforms to the object's shape. A common limitation of soft structures is tha ...

IEEE2019

i-PI 2.0: A universal force engine for advanced molecular simulations

Michele Ceriotti, David Mark Wilkins, Bingqing Cheng, Venkat Kapil, Riccardo Petraglia, Gareth Aneurin Tribello, Mariana Rossi Carvalho, Benjamin Aaron Helfrecht, Robert Horst Meissner, Alice Cuzzocrea, Sébastien Pierre Bienvenue, Przemyslaw Juda, Wei Fang

Progress in the atomic-scale modeling of matter over the past decade has been tremendous. This progress has been brought about by improvements in methods for evaluating interatomic forces that work by either solving the electronic structure problem explici ...

ELSEVIER SCIENCE BV2019

Experimental push-out investigation on the in-plane force-deformation behavior of integrally-attached timber Through-Tenon joints

Yves Weinand, Aryan Rezaei Rad, Henry V. Burton

Spurred by developments in digital fabrication, there has been an increase in the application of the Integral Mechanical Attachment (IMA) technique in timber plate structures. Despite its increase in popularity, there have been very few systematic investig ...

ELSEVIER SCI LTD2019

Active microrheology in corrugated channels

Ignacio Pagonabarraga Mora

We analyze the dynamics of a tracer particle embedded in a bath of hard spheres confined in a channel of varying section. By means of Brownian dynamics simulations, we apply a constant force on the tracer particle and discuss the dependence of its mobility ...

2018

Stiffness, force and drift capacity of in-plane loaded modern unreinforced brick masonry walls

Bastian Valentin Wilding

In countries of low to moderate seismicity, such as Switzerland, unreinforced masonry (URM) is mainly used in residential buildings due to its good insulation capacity and fire resistance along with a fair compressive strength. URM walls however show a lim ...

EPFL2018

Nanocapillaries combined with optical tweezers as a single molecule technique for studying DNA-protein complexes

Roman Bulushev

Interactions of proteins with DNA are essential for carrying out DNA's biological functions and performing a cellular cycle. Such processes as DNA replication, expression and repair are performed by an organised action of various proteins. To better unders ...

EPFL2017

Influence of load history on the force-displacement response of in-plane loaded unreinforced masonry walls

Katrin Beyer, Bastian Valentin Wilding, Kiarash Mohtasham Dolatshahi

Empirical drift capacity models for in-plane loaded unreinforced masonry (URM) walls are derived from results of quasi-static cyclic shear-compression tests. The experimentally determined drift capacities are, however, dependent on the applied demand, i.e. ...

2017

Graph Chatbot

Chattez avec Graph Search

Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.

AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.

Connectez-vous pour utiliser Chat avec Graph Search