Concept

DVD recorder

A DVD recorder is an optical disc recorder that uses optical disc recording technologies to digitally record analog or digital signals onto blank writable DVD media. Such devices are available as either installable drives for computers or as standalone components for use in television studios or home theater systems. As of March 1, 2007 all new tuner-equipped television devices manufactured or imported in the United States must include an ATSC tuner. The US Federal Communications Commission (FCC) has interpreted this rule broadly, including apparatus such as computers with TV tuner cards with video capture ability, videocassette recorders and standalone DVD recorders. NTSC DVD recorders are undergoing a transformation, either adding a digital ATSC tuner or removing over-the-air broadcast television tuner capability entirely. However, these DVD recorders can still record analog audio and analog video. Standalone DVD recorders, alongside Blu-ray recorders, have been relatively scarce in the United States due largely to "restrictions on video recording" and piracy concerns. The first DVD recorders appeared on the market in 1999–2000. Originally, DVD recorders supported one of three standards: DVD-RAM, DVD-RW (using DVD-VR), and DVD+RW (using DVD+VR), none of which are directly compatible. Most current DVD drives support both the + and - standards, while few support the DVD-RAM standard, which is not directly compatible with standard DVD drives. Recording speed is generally denoted in values of X (similar to CD-ROM usage), where 1X in DVD usage is equal to 1.321 MB/s, roughly equivalent to a 9X CD-ROM. In practice, this is largely confined to computer-based DVD recorders, since standalone units generally record in real time, that is, 1X speed. Recorders use a laser (usually 650 nm red) to read and write DVDs. The reading laser is usually not stronger than 5 mW, while the writing laser is considerably more powerful. The faster the writing speed is rated, the stronger the laser.

À propos de ce résultat
Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.
Cours associés (1)
PHYS-423: Plasma I
Following an introduction of the main plasma properties, the fundamental concepts of the fluid and kinetic theory of plasmas are introduced. Applications concerning laboratory, space, and astrophysica
Séances de cours associées (10)
Résistance au plasma : collisions coulombiennes et équation du momentum
Couvre la résistivité du plasma, les collisions coulombiennes et l'équation de l'élan dans le plasma.
Disque optique : technologie et défis
Couvre les principes et les défis de la technologie des disques optiques, y compris les CD, DVD et Blu-ray.
Physique générale: Mécanique
Explore les concepts mécaniques, y compris les moments d'inertie pour les solides communs et leurs applications pratiques.
Afficher plus
Publications associées (5)

Hardware-oriented pruning and quantization of Deep Learning models to detect life-threatening arrhythmias

Alexandre Schmid, Lizeth Gonzalez Carabarin

Wearable solutions based on Deep Learning (DL) for real-time ECG monitoring are a promising alternative to detect life-threatening arrhythmias. However, DL models suffer of a large memory footprint, which hampers their adoption in portable technologies. Th ...
IEEE2021

A New Cabled Stabilizer for the Nb3Sn React&Wind DEMO Conductor Prototype

Pierluigi Bruzzone, Kamil Sedlák, Boris Stepanov, Mithlesh Kumar, Vincenzo D'Auria

A Nb3Sn based, React&Wind flat cable, named RW2, was developed in the past three years at the Swiss Plasma Center in the scope of the EUROfusion conceptual studies for DEMO. The test results presented earlier proved an excellent DC performance, but large e ...
IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2021

A New Cabled Stabilizer for the Nb3Sn React&Wind DEMO Conductor Prototype

Pierluigi Bruzzone, Kamil Sedlák, Boris Stepanov, Mithlesh Kumar, Vincenzo D'Auria

A Nb3Sn based, React&Wind flat cable, named RW2, was developed in the past three years at the Swiss Plasma Center in the scope of the EUROfusion conceptual studies for DEMO. The test results presented earlier proved an excellent DC performance, but large e ...
2021
Afficher plus
Concepts associés (3)
DVD
Le DVD, sigle de l'anglais Digital Versatile Disc (« disque numérique polyvalent »), est un disque optique utilisé pour la sauvegarde et le stockage de données sous forme numérique. Créé en décembre 1995, il représente le format vidéo numérique le plus répandu dans le monde, successeur de la vidéocassette, du Laserdisc et du Video CD. Le format successeur du DVD Vidéo, adapté aux signaux TVHD, est le disque Blu-ray. Le terme Digital Video Disc (« disque vidéo numérique ») a longtemps été employé par la presse.
Caméscope
thumb|Caméscope Canon HF10 Un caméscope est un appareil électronique portatif permettant d'enregistrer des et du son sur un même support. Il combine donc les fonctions d'une caméra vidéo avec celles d'un magnétoscope, d'où son nom, mot-valise de ces deux termes et qui aurait été inventé par René Bouillot, à l'époque où il était ingénieur chez Thomson. Il s'agit d'une évolution technologique par rapport à la génération précédente qui faisait appel à deux appareils distincts.
Magnétoscope numérique
Un magnétoscope numérique (également appelé numériscope, DVR de l'anglais Digital Video Recorder, ou encore PVR de l'anglais Personal Video Recorder) ou au Québec ENP (Enregistreur Numérique Personnel) est un appareil électronique destiné à l'enregistrement dans une forme numérisée d'un signal vidéo et du son associé, sur divers supports tels qu'un disque dur (le plus courant), une mémoire flash (clé USB, carte SD) ou, dans les modèles plus anciens, des supports amovibles (DVD ou CD).