Publications associées à Flexion (matériau)

Seismic performance of slender RC U-shaped walls with a single-layer of reinforcement

Katrin Beyer, João Saraiva Esteves Pacheco de Almeida, Ryan Hoult

Reinforced concrete walls are commonly used to resist the lateral loading induced by wind and earthquake actions. While most walls include two vertical reinforcement layers, some regions of the world construct slender, non-rectangular concrete walls with a ...

2020

Mechanical response of layered titanate nanowires

László Forró, Luca Rossi, Endre Horvath, Raphaël Foschia

The mechanical response of individual titanate nanowires (H2Ti3O7), synthesized in an upscaled production (kg/month) was investigated by means of an Atomic Force Microscope (AFM) in nanomechanical spectroscopic mode. Because of their layered structure, bes ...

2020

Fatigue Damage Factor Calibration for Long-Span Cable-Stayed Bridge Decks

Alain Nussbaumer, José Joaquim Costa Branco de Oliveira Pedro, Cláudio Alexandre Pereira Baptista

Part 2 of the Eurocode 3 (EN 1993-2) proposes a straight forward fatigue verification method using a single heavy vehicle model (FLM3) and a damage equivalent factor, lambda, to represent the fatigue damaging effects of the real traffic on road bridges. Th ...

SPRINGER NATURE SWITZERLAND AG2019

X-Shells: A new class of deployable beam structures

Mark Pauly, Florin Isvoranu, Mina Konakovic Lukovic, Etienne Bouleau

We present X-shells, a new class of deployable structures formed by an ensemble of elastically deforming beams coupled through rotational joints. An X-shell can be assembled conveniently in a flat configuration from standard elastic beam elements and then ...

ASSOC COMPUTING MACHINERY2019

Folded-Tube Soft Pneumatic Actuators for Bending

Wyatt Marshall Felt

This article presents a model and experimental results for a new class of bending soft pneumatic actuators (SPAs) made from a single section of thin-walled flexible tubing. The actuator is formed by creasing the tubing into fin-like rectangular folds and i ...

MARY ANN LIEBERT, INC2019

Optimum Frame Design with Reused Stock Elements

Corentin Jean Dominique Fivet, Gennaro Senatore, Jan Friedrich Georg Brütting

This paper presents optimization methods for the synthesis of frame structures from a stock of reused elements. Reusing structural elements over multiple service lives has the potential to reduce the environmental impacts of building structures. This is be ...

2019

Two-dimensional quasi-static debonding in GFRP/balsa sandwich panels

Thomas Keller, Anastasios Vassilopoulos, Aida Cameselle Molares

The two-dimensional (2D) debonding behavior of GFRP/balsa sandwich panels presenting embedded circular disbonds at the face sheet/core interface was experimentally investigated. The bottom of the panels was fixed and out-of-plane quasi-static tensile loads ...

ELSEVIER SCI LTD2019

Experimental push-out investigation on the in-plane force-deformation behavior of integrally-attached timber Through-Tenon joints

Yves Weinand, Aryan Rezaei Rad, Henry V. Burton

Spurred by developments in digital fabrication, there has been an increase in the application of the Integral Mechanical Attachment (IMA) technique in timber plate structures. Despite its increase in popularity, there have been very few systematic investig ...

ELSEVIER SCI LTD2019

Chattez avec Graph Search

Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.

AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.

Flexion (matériau)

Seismic performance of slender RC U-shaped walls with a single-layer of reinforcement

Mechanical response of layered titanate nanowires

Fatigue Damage Factor Calibration for Long-Span Cable-Stayed Bridge Decks

X-Shells: A new class of deployable beam structures

Folded-Tube Soft Pneumatic Actuators for Bending

Seismic Stability of Wide-Flange Steel Columns Interacting with Embedded Column Base Connections

Evaluation of Quasi-Static and Dynamic Fracture Toughness on the Low-Alloy Reactor Pressure Vessel Steel JRQ in the Transition Region

Optimum Frame Design with Reused Stock Elements

Two-dimensional quasi-static debonding in GFRP/balsa sandwich panels

Experimental push-out investigation on the in-plane force-deformation behavior of integrally-attached timber Through-Tenon joints

Graph Chatbot

Chattez avec Graph Search

Folded-Tube Soft Pneumatic Actuators for Bending

Mechanical response of layered titanate nanowires

Fatigue Damage Factor Calibration for Long-Span Cable-Stayed Bridge Decks

Experimental push-out investigation on the in-plane force-deformation behavior of integrally-attached timber Through-Tenon joints

Optimum Frame Design with Reused Stock Elements

Seismic Stability of Wide-Flange Steel Columns Interacting with Embedded Column Base Connections

Evaluation of Quasi-Static and Dynamic Fracture Toughness on the Low-Alloy Reactor Pressure Vessel Steel JRQ in the Transition Region

Two-dimensional quasi-static debonding in GFRP/balsa sandwich panels

X-Shells: A new class of deployable beam structures

Seismic performance of slender RC U-shaped walls with a single-layer of reinforcement