Publications associées à Moteur hydraulique

Numerical simulations of Pelton turbine flow to predict large head variation influence

François Avellan, Cécile Münch-Alligné, Siamak Alimirzazadeh, Steve Crettenand

In the framework of the new feed-in-tariff system in Switzerland for Small Hydropower Plants (SHP), the aim of the SmallFLEX project, led by HES-SO Valais and performed in collaboration with EPFL, WSL, EAWAG, PVE, and FMV, is to show how SHP can provide wi ...

IOP PUBLISHING LTD2021

GPU-accelerated Pelton turbine simulation using finite volume particle method coupled with linear eddy viscosity models

François Avellan, Ebrahim Jahanbakhsh, Audrey Paulette Solange Maertens, Sebastián Camilo Leguizamón Sarmiento, Siamak Alimirzazadeh, Takashi Kumashiro

The numerical investigation of the unsteady flow patterns around a Pelton bucket can be helpful to improve the overall turbine efficiency by optimizing the bucket design based on identified loss mechanisms. Since the flow is highly turbulent, modeling the ...

IOP PUBLISHING LTD2019

Toward design optimization of a Pelton turbine runner

François Avellan, Christian Vessaz, Loïc Andolfatto, Christophe Tournier

The objective of the present paper is to propose a strategy to optimize the performance of a Pelton runner based on a parametric model of the bucket geometry, massive particle based numerical simulations and advanced optimization strategies to reduce the d ...

Springer Verlag2017

Approaches to reduce friction losses in headrace waterways of hydropower plants

Anton Schleiss, Michael Pfister, Helena Isabel Dos Santos Nogueira

Forum papers are thought-provoking opinion pieces or essays founded in fact, sometimes containing speculation, on a civil engineering topic of general interest and relevance to the readership of the journal. The views expressed in this Forum article do not ...

Asce-Amer Soc Civil Engineers2016

Flow Simulation of Jet Deviation by Rotating Pelton Buckets Using Finite Volume Particle Method

François Avellan, Ebrahim Jahanbakhsh, Christian Vessaz

The objective of the present paper is to perform numerical simulations of a high-speed water jet impinging on rotating Pelton buckets using the finite volume particle method (FVPM), which combines attractive features of smoothed particle hydrodynamics (SPH ...

2015

Finite Particle Flow Simulation of Free Jet Deviation by Rotating Pelton Buckets

Christian Vessaz

The prediction of hydraulic machines performances is of high interest to manufacturers in today's highly competitive market for new development or refurbishment of hydraulic power plant. An accurate prediction of the machines performances by numerical simu ...

EPFL2015

Flow simulation of a Pelton bucket using finite volume particle method

François Avellan, Ebrahim Jahanbakhsh, Christian Vessaz

The objective of the present paper is to perform an accurate numerical simulation of the high-speed water jet impinging on a Pelton bucket. To reach this goal, the Finite Volume Particle Method (FVPM) is used to discretize the governing equations. FVPM is ...

International Association For Hydraulic Research2014

Optimization of a Shared Tailrace Channel of Two Pumped-Storage Plants by Physical and Numerical Modeling

Giovanni De Cesare, Martin Peter Bieri, Stéphane Christian Olivier Terrier, Sylvain Candolfi

Pump and turbine operations lead to head losses in the tailrace channel. Pumping discharge may be limited due to potential air entrainment into the pump shaft when the downstream reservoir is at its lowest level and the head losses are too high. Regarding ...

2014

Efficient runner safety assessment during early design phase and root cause analysis

Olivier Braun

Fatigue related problems in Francis turbines, especially high head Francis turbines, have been published several times in the last years. During operation the runner is exposed to various steady and unsteady hydraulic loads. Therefore the analysis of force ...

International Association For Hydraulic Research2012

High Speed Flow Visualisation of an Impinging Jet on a Pelton Turbine Bucket

François Avellan, Mohamed Farhat, Alexandre Perrig

This paper deals with flow investigations using endoscopes in a single-injector reduced scale Pelton turbine performed with a CMOS high-speed camera. Both onboard and external visualizations techniques of the flow in a bucket are presented. The flow observ ...

ASME2007