Concept

Fossil fuel power station

A fossil fuel power station is a thermal power station which burns a fossil fuel, such as coal or natural gas, to produce electricity. Fossil fuel power stations have machinery to convert the heat energy of combustion into mechanical energy, which then operates an electrical generator. The prime mover may be a steam turbine, a gas turbine or, in small plants, a reciprocating gas engine. All plants use the energy extracted from the expansion of a hot gas, either steam or combustion gases. Although different energy conversion methods exist, all thermal power station conversion methods have their efficiency limited by the Carnot efficiency and therefore produce waste heat. Fossil fuel power stations provide most of the electrical energy used in the world. Some fossil-fired power stations are designed for continuous operation as baseload power plants, while others are used as peaker plants. However, starting from the 2010s, in many countries plants designed for baseload supply are being operated as dispatchable generation to balance increasing generation by variable renewable energy. By-products of fossil fuel power plant operation must be considered in their design and operation. Flue gas from combustion of the fossil fuels contains carbon dioxide and water vapor, as well as pollutants such as nitrogen oxides (NOx), sulfur oxides (SOx), and, for coal-fired plants, mercury, traces of other metals, and fly ash. Usually all of the carbon dioxide and some of the other pollution is discharged to the air. Solid waste ash from coal-fired boilers must also be removed. Fossil fueled power stations are major emitters of carbon dioxide (CO2), a greenhouse gas which is a major contributor to global warming. The results of a recent study show that the net income available to shareholders of large companies could see a significant reduction from the greenhouse gas emissions liability related to only natural disasters in the United States from a single coal-fired power plant. However, as of 2015, no such cases have awarded damages in the United States.

À propos de ce résultat
Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.
Cours associés (29)
ENG-410: Energy supply, economics and transition
This course examines energy systems from various angles: available resources, how they can be combined or substituted, their private and social costs, whether they can meet the energy demand, and how
ChE-414: Thermodynamics of energy conversion and storage
The course is an introduction to the energy conversion. It focusses on the thermodynamics of the engines and systems for the conversion of energy from fossil fuels and renewable resources. The relevan
ENG-636: NRG2019: Energy Systems: managing the transition to renewables
This Summer School will try to bring to together these very disparate topics including energy policy, modeling and technologies in one coherent single event and give the participants a unique perspect
Afficher plus
Concepts associés (26)
Centrale thermique
Une centrale thermique est une centrale électrique qui fonctionne à partir d'une source de chaleur selon le principe des machines thermiques. Cette transformation se fait soit directement, par détente des gaz de combustion, soit indirectement, par exemple à travers un cycle eau-vapeur. Les installations à cogénération utilisent en outre une partie de la chaleur résiduelle pour d'autres applications, telles que les réseaux de chaleur.
Tour aéroréfrigérante
Les tours aéroréfrigérantes ou TAR, aussi appelées tours de refroidissement, sont utilisées pour refroidir un liquide, généralement de l'eau, à l'aide d'un gaz, généralement l'air ambiant. Il s'agit d'un cas particulier d'échangeur de chaleur où le transfert thermique s'effectue par contact direct ou indirect entre les flux. Les tours de refroidissement sont des équipements courants, présents dans des installations de climatisation, ou dans des procédés industriels et énergétiques (centrales électriques, installations de combustion, sucreries, chimie.
Environmental impact of electricity generation
Electric power systems consist of generation plants of different energy sources, transmission networks, and distribution lines. Each of these components can have environmental impacts at multiple stages of their development and use including in their construction, during the generation of electricity, and in their decommissioning and disposal. These impacts can be split into operational impacts (fuel sourcing, global atmospheric and localized pollution) and construction impacts (manufacturing, installation, decommissioning, and disposal).
Afficher plus
MOOCs associés (2)
SES Swiss-Energyscope
La transition énergique suisse / Energiewende in der Schweiz
Water quality and the biogeochemical engine
Learn about how the quality of water is a direct result of complex bio-geo-chemical interactions, and about how to use these processes to mitigate water quality issues.

Graph Chatbot

Chattez avec Graph Search

Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.

AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.