Publications associées à Hermetic seal

Wafer-Level Vacuum Sealing for Packaging of Silicon Photonic MEMS

Niels Quack, Hamed Sattari, Alain Yuji Takabayashi, Göran Stemme

Silicon (Si) photonic micro-electro-mechanical systems (MEMS), with its low-power phase shifters and tunable couplers, is emerging as a promising technology for large-scale reconfigurable photonics with potential applications for example in photonic accele ...

SPIE-INT SOC OPTICAL ENGINEERING2021

Solid-liquid interdiffusion (SLID) bonding in the Au-In system: experimental study and 1D modelling

Michel Rappaz, Aïcha Hessler-Wyser, Léa Deillon, Thierry Hessler

Au-In bonds with a nominal composition of about 60 at.% In were fabricated for use in wafer-level packaging of MEMS. The microstructure of the bonds was studied by scanning electron microscopy. The bond hermeticity was then assessed using oxidation of Cu t ...

Institute of Physics2015

Low-temperature thin-film indium bonding for reliable wafer-level hermetic MEMS packaging

Nico de Rooij, Danick Briand, Yves Pétremand

This paper reports on low-temperature and hermetic thin-film indium bonding for wafer-level encapsulation and packaging of delicate and temperature sensitive devices. This indium-bonding technology enables bonding of surface materials commonly used in MEMS ...

Institute of Physics2013

Encapsulation hermétique pour systèmes hydro- et thermo-sensibles

Frank Seigneur

The quantity of MEMS manufacturers has considerably been increasing these last years. This doesn't mean that the introduction of such products on the market has become easier. A packaging operation is needed to obtain a usable product out of a microsystem. ...

EPFL2009

Hermetic package for optical MEMS

Peter Ryser, Jacques Jacot, Thomas Maeder, Yannick Sébastien Fournier, Frank Seigneur

This article describes the design and fabrication of a hermetic LTCC package for an optical MEMS chip designed for space applications. The package must ensure electrical and optical connections, mechanical positioning, atmosphere control, and finally low t ...

2009

Laser soldered packaging hermeticity measurement using metallic conductor resistance

Jacques Jacot, Thomas Maeder, Frank Seigneur

Packaging is the last step of the manufacturing process of Microsystems. The LPM is working on the development of a two-part soldered packaging. One part of the package is metallic; the other part is made of glass. The goal of the project is to solder the ...

2006

Laser Soldered Packaging Hermeticity Measurement Using Metallic Conductor Resistance

Jacques Jacot, Thomas Maeder, Frank Seigneur

Packaging is the last step of the manufacturing process of Microsystems. The LPM is working on the development of a two-part soldered packaging. One part of the package is metallic; the other part is made of glass. The goal of the project is to solder the ...

2006