Publications associées à Rectification (mécanique)

Learning From Demonstration and Interactive Control of Variable-Impedance to Cut Soft Tissues

In this article, we propose an approach to extract variable-impedance during cutting tasks from human demonstrations, so as to ease soft-tissue cutting by robots. We model the dynamic adjustment of the human arm during interactions with the tissue and tran ...

2021

Parametric Experimental Study and Design of Experiment Modelling of Sapphire Grinding

Daniel Sage

This study investigates and models the grinding process of single crystal sapphire. Five parameters: the wheel speed, the feed speed, the vertical feed, the ultrasonic assistance and the crystallographic direction were considered via a design of experiment ...

Elsevier2017

Advanced sensor signal feature extraction and pattern recognition for wire EDM process monitoring

Paul Xirouchakis, Roberto Pérez

Wire electrical discharge machining (WEDM) is investigated in the perspective of zero-defect manufacturing with the scope to detect anomalous process conditions leading to typical defects generated during WEDM, i.e. the occurrence of lines and marks on the ...

Elsevier Science Bv2016

A model to determine the optimal parameters for sustainable-energy machining in a multi-pass turning operation

Ian Anthony Stroud, Olcay Akten, Muhammad Arif

This study presents a model for the optimization of machining parameters for the minimum energy consumption in a multi-pass turning operation. The model takes into account finishing and roughing passes separately for the energy optimization followed by the ...

Professional Engineering Publishing2014

An empirical study on the characterization of machined surface integrity by chip morphology in dry end-milling of titanium alloy

Muhammad Arif

Titanium alloys manifest low thermal conductivity and high work hardenability in machining. These alloys are thus considered as difficult-to-machine at higher cutting speeds and pose serious problems in machining such as degraded machined surface and rapid ...

Professional Engineering Publishing2014

Insights into the thermo-mechanics of orthogonal nanometric machining

Jean-François Molinari, Guillaume Anciaux, Pedro Romero

The fabrication of high precision miniaturized components in micro- and nano-technologies requires a deep understanding of the physical mechanisms governing the nanomachining process. To aid with this need, the current article employs molecular dynamics to ...

Elsevier2013

Part Programming to Realize Chatter Free and Efficient High Speed Milling

Saurabh Aggarwal

High speed milling (HSM) is the most known machining process due to its application in various industries. In milling, a rotating cutting tool removes a large amount of material along a predefined toolpath to manufacture the final part with a desired shape ...

EPFL2012

Modeling and Simulation of Energy Efficient Milling Process Plans for Prismatic Parts

Nenad Nesic

The milling process has been continuously optimized from many aspects: forces, velocities, stability, quality. Numerous papers have been published that report results in the domain of toolpath optimization with criteria such as raising the quality of the m ...

EPFL2012

A multi-criteria decision method for sustainability assessment of the use phase of machine tool systems

Paul Xirouchakis, Ian Anthony Stroud, Ioan Oliver Avram

In recent years, going green has become a strategic priority in manufacturing which has evolved from the growing awareness of the need for environmentally friendly processes and products. Recent trends in developing new machining strategies able to support ...

Springer-Verlag2011

Modal Identification and Modeling of Bearings for Very High-Speed Rotors

Grégoire Dormond

Rotor-bearing systems take an important place in engineering applications and are used in many industrial systems: gas turbines, compressors, jet engines, machine-tool spindles, etc. The spindle is an essential component of manufacturing systems involving ...

EPFL2010