Concept
Nitrure de titane
Personnes associées (30)
Paul Muralt
Paul Muralt received a diploma in experimental physics in 1978 at the Swiss Federal Institute of Technology ETH in Zurich. He accomplished his Ph.D. thesis in the field of commensurate-incommensurate phase transitions at the Solid State Laboratory of ETH. In the years 1984 and 1985 he held a post doctoral position at the IBM Research Laboratory in Zurich where he pioneered the application of scanning tunneling microscopy to surface potential imaging. In 1987, after a stay at the Free University of Berlin, he joined the Balzers group in Liechtenstein. He specialized in sputter deposition techniques, and managed since 1991 a department for development and applications of Physical Vapor Deposition and PECVD processes. In 1993, he joined the Ceramics Laboratory of EPFL in Lausanne. AS group leader for thin films and MEMS devices, he specialized in piezoelectric and pyroelectric MEMS with mostly Pb(Zr,Ti)O3 and AlN thin film. His research interests are in thin film growth in general, and more specifically in property assessment of small ferroelectric structures, in integration issues of ferroelectric and other polar materials, property-microstructure relationships, and applications of polar materials in semiconductor and micro-electro-mechanical devices. More recently he extended his interests to oxide thin films of ionic conductors. The focus in piezoelectric thin films was directed towards AlN-ScN alloys. He gives lectures in thin film processing, micro fabrication, and surface analysis. He authored or co-authored more than 230 scientific articles. He became Fellow of IEEE in 2013. In 2005, he received an outstanding achievement award at the International Symposium on Integrated Ferroelectrics (ISIF), and in 2016 the B.C. Sawyer Memorial award.
Chairman of the International Workshops on Piezoelectric MEMS(http://www.piezomems2011.org/)
Alireza Karimi
Alireza Karimi received his B. Sc. and M. Sc. degrees in Electrical Engineering in 1987 and 1990, respectively, from Amir Kabir University (Tehran Polytechnic). Then he received his DEA and Ph. D. degrees both on Automatic Control from Institut National Polytechnique de Grenoble (INPG) in 1994 and 1997, respectively. He was Assistant Professor at Electrical Engineering Department of Sharif University of Technology in Teheran from 1998 to 2000. Then he joined Automatic Laboratory of Swiss Federal Institute of Technology at Lausanne, Switzerland. He is currently Professor of Automatic Control and the head of "Data-Driven Modelling and Control" group. His research interests include data-driven controller tuning and robust control with application to mechatronic systems and electrical grids.
Yves Leterrier
Yves Leterrier joined EPFL in 1993 and is a faculty member of the Materials Institute. He is a senior scientist and lecturer in the Laboratory for Processing of Advanced Composites (LPAC, previously Laboratory of Composite and Polymer Technology, LTC). Activities
2000-2005: Foundation and Chair of the Korea-Switzerland joint symposia on materials and micro-technologies2004-2008: Board member of FLEXIDIS (the European flexible display consortium) 2004-2009: Group leader on lightweight materials for Solar ImpulseSince 2008: Board member of the French Adhesion SocietySince 2000: President of the EPFL Materials Science Library commissionSince 2012: Editorial board member, Applied Surface ScienceSince 2014: Associate Editor, Frontiers in MaterialsSince 2021: Coordinator of the EPFL Minor on 'Engineering for Sustainability'
Background
1987: MS in materials science and solid state physics (INPL, France) 1991: PhD in materials science (Ecole des Mines, INPL, France) 1992: Research Associate, National Institute of Standards and Technology (NIST, USA)
Peter Ryser
Dr. Peter Ryser is a Professor Emeritus at the Swiss Federal Institute of Technology in Lausanne. He has over three decades of research and teaching experience from various corporate and academic institutions. He was previously a Director at Siemens Building Technologies where he was responsible for R&D, product innovation and patents. Dr. Ryser has a Ph.D. in applied Physics from the University of Geneva, a Masters degree in Experimental Physics and an MBA.
Jürgen Brugger
I am a Professor of Microengineering and co-affiliated to Materials Science. Before joining EPFL I was at the MESA Research Institute of Nanotechnology at the University of Twente in the Netherlands, at the IBM Zurich Research Laboratory, and at the Hitachi Central Research Laboratory, in Tokyo, Japan. I received a Master in Physical-Electronics and a PhD degree from Neuchâtel University, Switzerland. Research in my laboratory focuses on various aspects of MEMS and Nanotechnology. My group contributes to the field at the fundamental level as well as in technological development, as demonstrated by the start-ups that spun off from the lab. In our research, key competences are in micro/nanofabrication, additive micro-manufacturing, new materials for MEMS, increasingly for wearable and biomedical applications. Together with my students and colleagues we published over 200 peer-refereed papers and I had the pleasure to supervise over 25 PhD students. Former students and postdocs have been successful in receiving awards and starting their own scientific careers. I am honoured for the appointment in 2016 as Fellow of the IEEE “For contributions to micro and nano manufacturing technology”. In 2017 my lab was awarded an ERC AdvG in the field of advanced micro-manufacturing.
Nicolas Grandjean
Nicolas Grandjean received a PhD degree in physics from the University ofNice Sophia Antipolis in 1994 and shortly thereafter joined the French National Center for Scientific Research (CNRS) as a permanent staff member. In 2004, he was appointed tenure-track assistant professor at the École polytechnique fédérale de Lausanne (EPFL) where he created the Laboratory for advanced semiconductors for photonics and electronics. He was promoted to full professor in 2009. He was the director of the Institute of Condensed Matter Physics from 2012 to 2016 and then moved to the University of California at Santa Barbara where he spent 6 months as a visiting professor. Since 2018, he is the head of the School of Physics at the EPFL. He was awarded the Sandoz Family Foundation Grant for Academic Promotion, received the “Nakamura Lecturer” Award in 2010, the "Quantum Devices Award” at the 2017 Compound Semiconductor Week, and “2016 best teacher” award from the EPFL Physics School. His research interests are focused on the physics of nanostructures and III-V nitride semiconductor quantum photonics.
Stefano Mischler
Stefano Mischler obtained the diploma in materials science in 1983 at the Swiss Federal Institute of Technology ETHZ in Zurich. He accomplished his PhD thesis in the field of surface analysis and corrosion at the Materials department of the Swiss Federal Institute of Technology EPFL in Lausanne in 1988. In the years 1989-1990 he held a postdoctoral position at the United Kingdom Atomic Energy Establishment in Harwell (Oxfordshire) where he developed novel quantification procedures for Auger Electron Spectroscopy and high lateral resolution surface analytical methods for fiber reinforced ceramics. In 1991 he joined the newly created Tribology group at the Laboratory for Metallurgical Chemistry of the EPFL where he developed research activities in the field of wear-corrosion interactions (tribocorrosion) and of tribological coatings. He is currently head of the tribology group and is developing a reserach and training activity devoted to modern aspects of tribology and surface science and technology, including surface chemical effects in tribology, biotribology and biocorrosion, tribology in microfabrication processes and wear protection methods. In 2006 he spent a sabbatical leave of 3 months at the Tokyo Medical and Dental University, Institute of Biomaterials.
Philippe Buffat
Born in Lausanne (Switzerland) in 1942. EPUL physics engineer diploma in 1967 and EPFL PhD in physics in 1976. From 1966 he studies at the Experimental Physics Laboratory (Prof. J.P. Borel) the physical properties peculiar to the very small size metal crystals and gets a PhD degree for his thesis "Abaissement de la température de fusion de petits cristaux d'or par effet de taille thermodynamique" (Lowering of the melting temperature of small gold crystals by thermodynamic size effect). In 1971, he starts to develop an electron microscopy facility available to all EPFL students and researchers (nowadays Centre Interdisciplinaire de Microscopie Electronique CIME) that he manages till 2007. In parallel he teaches the principles of electron microscopy and the Experimental methods of physics at the Physics/Basic Sciences School (SB). In addition, he trains a large part of the facility users. Honorary professor BS/EPFL he carries-out a free-lance research at CIME and in collaboration with the Institute of Crystallography of the Russian Academy of Sciences (ICRAS, Moscow) and the International Centre of Electron Microscopy for Material Science (IC-EM AGH Krakow) This activity covers all the techniques related to transmission and scanning electron microscopy applied to materials science and solid-state physics. His interest is directed towards the structure of nanocrystals, their size effects and behavior under strong electron irradiation, the phase transitions in perovskites, the characterization of nanophases, multilayer and interface structures of crystalline materials and bioceramics. More recently a large research part has moved to understanding/pointing-out the adequacy between the limits of the instruments and their interpretation means in regard of their use in a multiusers facility with a large turnover and a wide range of materials/structures. He is past-president (2006-2007) of the Société Française des Microscopies (Sfµ), honorary member of the Sfµ and of the Swiss Society of Optics and Microscopy (SSOM).
Giorgio Margaritondo
De nationalité américaine et suisse, Giorgio Margaritondo est né à Rome (Italie) en 1946. Il a reçu la Laurea cum laude en physique de l'Université de Rome en 1969. De 1969 à 1978, il a travaillé pour le Consiglio Nazionale delle Ricerche (CNR), à Rome, à Frascati et, pendant la période 1975-1977, chez Bell Laboratories aux Etats-Unis. De 1978 à 1990, il est professeur de physique à l'Université du Wisconsin, à Madison (Etats-Unis); en 1984, il est nommé vice-directeur au Centre de rayonnement synchrotron de la même université. En 1990, il est engagé à l'EPFL comme professeur ordinaire et dirige l'Institut de physique appliquée au Département de physique. Il a été également membre honoraire du corps professoral de l'Université Vanderbilt à Nashville. En 2001 il a été nommé doyen de la Faculté des sciences de base de l'EPFL; en 2004, il a été nommé Vice-président pour les affaires académiques.; en 2010 et jusqu'à sa retraite de l'EPFL en 2016 il est devenu Doyen de la formation continue. A côté de ses cours de physique générale, son activité de recherche porte sur la physique des semiconducteurs et des supraconducteurs (états électroniques, surfaces, interfaces) et des systèmes biologiques; ses principales méthodes expérimentales sont la spectroscopie et la spectromicroscopie électroniques, l'imagerie aux rayons x et la microscopie SNOM, y compris les expériences avec le rayonnement synchrotron et le laser à électrons libres. Auteur d'environ 700 articles scientifiques et de 9 livres, il a aussi été responsable de 1995 à 1998 des programmes scientifiques du Synchrotron ELETTRA à Trieste. Depuis 1997, il a été le coordinateur de la table ronde de la Commission européenne pour le rayonnement synchrotron, et président du conseil de la "Integrated Initiative" de la Commission européenne pour les synchrotrons et les lasers à électrons libres (IA-SFS, ensuite ELISA), le plus grand réseau au monde de laboratoires dans ce domaine. En 2011-2015, il a été Editor-in-Chief du Journal of Physics D (Applied Physics). A présent, il est vice-président du conseil de l'Università della Svizzera Italiana (USI) et président du Scientific and Technological Committee de l'Istituto Italiano di Tecnologia (IIT). Il est "Fellow" de l'American Physical Society et de l'American Vacuum Society; il est également "Fellow and Chartered Physicist" de l'Institute of Physics.
Cyril Cayron
Mes recherches: J'ai travaillé comme microscopiste/cristallographe/métallurgiste sur des projets très variés comme les aciers pour le nucléaire, les alliages titane et nickel pour l'aéronautique, les interconnections en cuivre pour la microélectronique, les piles à combustible haute et basse température, le silicium photovoltaïque hétérojonction et monolike, les batteries au lithium à base de LiFePO4 et silicium. Derrière la plupart de ces sujets de recherche appliquée se cachent des problèmes de recherche fondamentale comme celui lié aux transformations de phases. J'ai donc été amené à travailler sur ce sujet passionnant et j'ai pu démontrer que les variants cristallographiques générés par des transitions structurales forment une structure algébrique de groupoïde. Ces travaux ont mené au développement du logiciel de reconstruction des grains parents à partir de données EBSD appelé ARPGE et distribué dans plus de 20 pays. En 2013-2015 j'ai proposé un nouveau modèle cristallographique pour les transformations martensitiques fcc-bcc dans les aciers, comme une alternative à la théorie phénoménologique de la transformation martensitique. Ce modèle a été depuis étendu aux transformations fcc-hcp (type cobalt), bcc-hcp (type titane) et bcc-fcc (type laiton), ainsi qu’à differents modes de maclage mécanique dans les métaux fcc et hcp. Ce modèle à sphères dures montre que la transformation implique une «distorsion angulaire», forme plus générale que le cisaillement. Le modèle prévoit la possibilité que le plan d’interface de certaines macles mécaniques ne soit pas un plan invariant. Un tel cas de maclage « exotique » a été observé expérimentalement par EBSD en 2017 dans un monocristal de magnésium pur. Je travaille maintenant à définir de manière algébrique les concepts de variants (orientation, distortion, correspondance), et sur les types de macles mécaniques (I, II, et d'autres oubliés des théoriques classiques). Mon parcours : 2014-maintenant: Collaborateur scientifique à l'EPFL/LMTM, Neuchâtel, Suisse. J'aide le professeur Roland Logé dans ses travaux de recherche sur les liens entre les fortes déformations, les textures, les tailles de grains et les transformations de phases (diffusives et displacives). Je suis en charge de la salle de métallographie et des caractérisations SEM, EDS, EBSD, TEM, HRTEM. Je codirige trois thèses (Annick Baur, Margaux Larcher, Céline Guidoux). Je suis reviewer pour Acta Mater., Scripta Mater., Acta Cryst., J. Appl. Cryst., Mater. Charact., etc. 2000-2014: Ingénieur de recherche et responsable du groupe Nanocaractérisation, CEA/LITEN, Grenoble, France. 2012 : Habilitation à Diriger des Recherches (HDR). 1996-2000: Thèse sur l'étude par microscopie électronique de composites à matrice aluminium. Directeur de thèse Philippe Buffat, CIME, EPFL, Lausanne, Suisse. J'ai pu montrer un lien cristallographique entre différentes phases des alliages 2xxx et 6xxx et proposer pour la première fois une structure complète pour la phase beta prime des nanoprécipités. 1995-1996: Scientifique du contingent, travail sur les écrans électrochromes, COGIDEV, Rueil-Malmaison, France, fondé par M. André Giraud, ancien ministre de la défense et ancien ministre de l’industrie. 1992-1995: Ecole Nationale Supérieure des Mines de Nancy, France