Concept
Titanium nitride
Related people (30)
Paul Muralt
Paul Muralt received a diploma in experimental physics in 1978 at the Swiss Federal Institute of Technology ETH in Zurich. He accomplished his Ph.D. thesis in the field of commensurate-incommensurate phase transitions at the Solid State Laboratory of ETH. In the years 1984 and 1985 he held a post doctoral position at the IBM Research Laboratory in Zurich where he pioneered the application of scanning tunneling microscopy to surface potential imaging. In 1987, after a stay at the Free University of Berlin, he joined the Balzers group in Liechtenstein. He specialized in sputter deposition techniques, and managed since 1991 a department for development and applications of Physical Vapor Deposition and PECVD processes. In 1993, he joined the Ceramics Laboratory of EPFL in Lausanne. AS group leader for thin films and MEMS devices, he specialized in piezoelectric and pyroelectric MEMS with mostly Pb(Zr,Ti)O3 and AlN thin film. His research interests are in thin film growth in general, and more specifically in property assessment of small ferroelectric structures, in integration issues of ferroelectric and other polar materials, property-microstructure relationships, and applications of polar materials in semiconductor and micro-electro-mechanical devices. More recently he extended his interests to oxide thin films of ionic conductors. The focus in piezoelectric thin films was directed towards AlN-ScN alloys. He gives lectures in thin film processing, micro fabrication, and surface analysis. He authored or co-authored more than 230 scientific articles. He became Fellow of IEEE in 2013. In 2005, he received an outstanding achievement award at the International Symposium on Integrated Ferroelectrics (ISIF), and in 2016 the B.C. Sawyer Memorial award.
Chairman of the International Workshops on Piezoelectric MEMS(http://www.piezomems2011.org/)
Alireza Karimi
Alireza Karimi received his B. Sc. and M. Sc. degrees in Electrical Engineering in 1987 and 1990, respectively, from Amir Kabir University (Tehran Polytechnic). Then he received his DEA and Ph. D. degrees both on Automatic Control from Institut National Polytechnique de Grenoble (INPG) in 1994 and 1997, respectively. He was Assistant Professor at Electrical Engineering Department of Sharif University of Technology in Teheran from 1998 to 2000. Then he joined Automatic Laboratory of Swiss Federal Institute of Technology at Lausanne, Switzerland. He is currently Professor of Automatic Control and the head of "Data-Driven Modelling and Control" group. His research interests include data-driven controller tuning and robust control with application to mechatronic systems and electrical grids.
Yves Leterrier
Yves Leterrier joined EPFL in 1993 and is a faculty member of the Materials Institute. He is a senior scientist and lecturer in the Laboratory for Processing of Advanced Composites (LPAC, previously Laboratory of Composite and Polymer Technology, LTC). Activities
2000-2005: Foundation and Chair of the Korea-Switzerland joint symposia on materials and micro-technologies2004-2008: Board member of FLEXIDIS (the European flexible display consortium) 2004-2009: Group leader on lightweight materials for Solar ImpulseSince 2008: Board member of the French Adhesion SocietySince 2000: President of the EPFL Materials Science Library commissionSince 2012: Editorial board member, Applied Surface ScienceSince 2014: Associate Editor, Frontiers in MaterialsSince 2021: Coordinator of the EPFL Minor on 'Engineering for Sustainability'
Background
1987: MS in materials science and solid state physics (INPL, France) 1991: PhD in materials science (Ecole des Mines, INPL, France) 1992: Research Associate, National Institute of Standards and Technology (NIST, USA)
Peter Ryser
Dr. Peter Ryser is a Professor Emeritus at the Swiss Federal Institute of Technology in Lausanne. He has over three decades of research and teaching experience from various corporate and academic institutions. He was previously a Director at Siemens Building Technologies where he was responsible for R&D, product innovation and patents. Dr. Ryser has a Ph.D. in applied Physics from the University of Geneva, a Masters degree in Experimental Physics and an MBA.
Jürgen Brugger
I am a Professor of Microengineering and co-affiliated to Materials Science. Before joining EPFL I was at the MESA Research Institute of Nanotechnology at the University of Twente in the Netherlands, at the IBM Zurich Research Laboratory, and at the Hitachi Central Research Laboratory, in Tokyo, Japan. I received a Master in Physical-Electronics and a PhD degree from Neuchâtel University, Switzerland. Research in my laboratory focuses on various aspects of MEMS and Nanotechnology. My group contributes to the field at the fundamental level as well as in technological development, as demonstrated by the start-ups that spun off from the lab. In our research, key competences are in micro/nanofabrication, additive micro-manufacturing, new materials for MEMS, increasingly for wearable and biomedical applications. Together with my students and colleagues we published over 200 peer-refereed papers and I had the pleasure to supervise over 25 PhD students. Former students and postdocs have been successful in receiving awards and starting their own scientific careers. I am honoured for the appointment in 2016 as Fellow of the IEEE “For contributions to micro and nano manufacturing technology”. In 2017 my lab was awarded an ERC AdvG in the field of advanced micro-manufacturing.
Nicolas Grandjean
Nicolas Grandjean received a PhD degree in physics from the University ofNice Sophia Antipolis in 1994 and shortly thereafter joined the French National Center for Scientific Research (CNRS) as a permanent staff member. In 2004, he was appointed tenure-track assistant professor at the École polytechnique fédérale de Lausanne (EPFL) where he created the Laboratory for advanced semiconductors for photonics and electronics. He was promoted to full professor in 2009. He was the director of the Institute of Condensed Matter Physics from 2012 to 2016 and then moved to the University of California at Santa Barbara where he spent 6 months as a visiting professor. Since 2018, he is the head of the School of Physics at the EPFL. He was awarded the Sandoz Family Foundation Grant for Academic Promotion, received the “Nakamura Lecturer” Award in 2010, the "Quantum Devices Award” at the 2017 Compound Semiconductor Week, and “2016 best teacher” award from the EPFL Physics School. His research interests are focused on the physics of nanostructures and III-V nitride semiconductor quantum photonics.
Stefano Mischler
Stefano Mischler obtained the diploma in materials science in 1983 at the Swiss Federal Institute of Technology ETHZ in Zurich. He accomplished his PhD thesis in the field of surface analysis and corrosion at the Materials department of the Swiss Federal Institute of Technology EPFL in Lausanne in 1988. In the years 1989-1990 he held a postdoctoral position at the United Kingdom Atomic Energy Establishment in Harwell (Oxfordshire) where he developed novel quantification procedures for Auger Electron Spectroscopy and high lateral resolution surface analytical methods for fiber reinforced ceramics. In 1991 he joined the newly created Tribology group at the Laboratory for Metallurgical Chemistry of the EPFL where he developed research activities in the field of wear-corrosion interactions (tribocorrosion) and of tribological coatings. He is currently head of the tribology group and is developing a reserach and training activity devoted to modern aspects of tribology and surface science and technology, including surface chemical effects in tribology, biotribology and biocorrosion, tribology in microfabrication processes and wear protection methods. In 2006 he spent a sabbatical leave of 3 months at the Tokyo Medical and Dental University, Institute of Biomaterials.
Philippe Buffat
Born in Lausanne (Switzerland) in 1942. EPUL physics engineer diploma in 1967 and EPFL PhD in physics in 1976. From 1966 he studies at the Experimental Physics Laboratory (Prof. J.P. Borel) the physical properties peculiar to the very small size metal crystals and gets a PhD degree for his thesis "Abaissement de la température de fusion de petits cristaux d'or par effet de taille thermodynamique" (Lowering of the melting temperature of small gold crystals by thermodynamic size effect). In 1971, he starts to develop an electron microscopy facility available to all EPFL students and researchers (nowadays Centre Interdisciplinaire de Microscopie Electronique CIME) that he manages till 2007. In parallel he teaches the principles of electron microscopy and the Experimental methods of physics at the Physics/Basic Sciences School (SB). In addition, he trains a large part of the facility users. Honorary professor BS/EPFL he carries-out a free-lance research at CIME and in collaboration with the Institute of Crystallography of the Russian Academy of Sciences (ICRAS, Moscow) and the International Centre of Electron Microscopy for Material Science (IC-EM AGH Krakow) This activity covers all the techniques related to transmission and scanning electron microscopy applied to materials science and solid-state physics. His interest is directed towards the structure of nanocrystals, their size effects and behavior under strong electron irradiation, the phase transitions in perovskites, the characterization of nanophases, multilayer and interface structures of crystalline materials and bioceramics. More recently a large research part has moved to understanding/pointing-out the adequacy between the limits of the instruments and their interpretation means in regard of their use in a multiusers facility with a large turnover and a wide range of materials/structures. He is past-president (2006-2007) of the Société Française des Microscopies (Sfµ), honorary member of the Sfµ and of the Swiss Society of Optics and Microscopy (SSOM).
Giorgio Margaritondo
Citizen of the USA and Switzerland, Giorgio Margaritondo was born in Rome, Italy, in 1946. He received the Laurea summa cum laude from the University of Rome in 1969. From 1969 he was an employee of the Italian National Research Council in Rome and Frascati and, in 1975-77, he was at Bell Laboratories in the USA. From 1978 to 1990, he was professor of physics at the University of Wisconsin-Madison in the USA; in 1984 he was nominated associate director for research of the Synchrotron Radiation Center of the same university. In 1990 he was nominated "professeur ordinaire" (full professor) at the EPFL; he directed the Institute of Applied Physics and the Physics Department. He was also a honorary faculty member at Vanderbilt University in Nashville. In 2001 he became Dean of the EPFL Faculty of Basic Sciences. In 2004 he was nominated Provost and he served until 2010, when he became Dean of Continuing Education, until his retirement from the EPFL in 2016 In addition to teaching general physics, his activity concerns the physics of semiconductors and superconductors (electronic states, surfaces and interfaces) and of biological systems; his main experimental techniques are electron spectroscopy and spectromicroscopy, x-ray imaging and scanning near-field microscopy, including experiments with synchrotron light and with free electron lasers. Author of more than 700 scientific publications and 9 books, he was also coordinator in 1995-98 of the scientific division of the Elettra synchrotron in Trieste. In 1997-2003 he was coordinator of the European Commission Round Table on synchrotron radiation, and then became president of the Council of the European Commission Integrated Initiative on Synchrotron and Free Electron Laser Science (IA-SFS and then ELISA), the largest network in the world in this domain. In 2011-15, he was Editor-in-Chief of Journal of Physics D (Applied Physics). He is currently vice-president of the council of the Università della Svizzera Italiana (USI), and president of the Scientific and Technological Committee of the Italian Institute of Technology (IIT). He is Fellow of the American Physical Society and of the American Vacuum Society and Fellow and Chartered Physicist of the Institute of Physics.
Cyril Cayron
1992-1995 Engineering School. Ecole des Mines de Nancy.
1994-1995 Master's degree in Materials Science (rank = 1st)
1995-1996 Military Service
1996-2000 PhD at EPFL-CIME. Precipitation in 6xxx alloys and composites.
2000-2014 Researcher, Engineer and Group leader on materials for new energies at CEA-Grenoble, France.
2012 Habilitation to supervise researches (HDR)
2014-now Senior Scientist at EPFL-LMTM
Creator of the computer programs GenOVa and ARPGE (in Python).
I currently work on crystallographic models of martensitic transformations and deformation twinning.