Publications associées à Tweeter

Testing and nonlinear modelling of industrialized light-frame wooden diaphragms including optimized nailing and nonstructural sheathing

This article presents the outcomes of a large project towards the investigation of the lateral performance of full-scale industrialized light-frame wooden diaphragms. 10 full-scale diaphragms of 3.6 m by 2.4 m were tested under in-plane lateral loading (mo ...

Elsevier Sci Ltd2023

Plasma-based Electroacoustic Actuator for Broadband Sound Absorption

Stanislav Sergeev

Environmental noise, mostly related to human activities, has an immense impact on public health. The development of noise reduction technologies is paramount in addressing this problem. Because of practical and economic reasons, a compact, broadband, light ...

EPFL2022

Numerical simulations of retrofitting interventions on timber floors in unreinforced masonry

Katrin Beyer, Igor Tomic, Ivana Bozulic

Unreinforced masonry buildings with flexible timber floors are amongst the most vulnerable building typologies for seismic loading. Though flexible diaphragms play a role in the seismic behaviour of unreinforced masonry buildings, the impact of the connect ...

2022

MOCCA: Modeling and Optimizing Cone-joints for Complex Assemblies

Mark Pauly, Peng Song

We present a computational framework for modeling and optimizing complex assemblies using cone joints. Cone joints are integral joints that generalize traditional single-direction joints such as mortise and tenon joints to support a general cone of directi ...

2021

Numerical Simulation of Unreinforced Masonry Buildings with Timber Diaphragms

Katrin Beyer, Francesco Vanin, Igor Tomic, Ivana Bozulic

Though flexible diaphragms play a role in the seismic behaviour of unreinforced masonry buildings, the effect of the connections between floors and walls is rarely discussed or explicitly modelled when simulating the response of such buildings. These flexi ...

2021

Toward Wideband Steerable Acoustic Metasurfaces with Arrays of Active Electroacoustic Resonators

Romain Christophe Rémy Fleury, Hervé Lissek, Etienne Thierry Jean-Luc Rivet, Thomas Laurence

We introduce an active concept for achieving acoustic metasurfaces with steerable reflection properties, effective over a wide frequency band. The proposed active acoustic metasurface consists in a surface array of subwavelength loudspeakers diaphragms, ea ...

2018

Seismic Performance Characterization of Wood-Sheathed and Cold-Formed Steel Framed Floor and Roof Diaphragm Structures

Dimitrios Lignos

This paper describes a research program involving wood-sheathed and cold-formed steel (CFS) framed diaphragm assemblies.The diaphragm’s response to in-plane monotonic and reversed cyclic lateral loading is investigated in an effort to characterize the seis ...

Asce-Amer Soc Civil Engineers2018

Magnetic-Order Crossover in Coupled Spin Ladders

We report a novel crossover behavior in the long-range-ordered phase of a prototypical spin-1/2 Heisenberg antiferromagnetic ladder compound (C7H10N)(2)CuBr4. The staggered order was previously evidenced from a continuous and symmetric splitting of (NNMR)- ...

American Physical Society2017

Characterization of Cold-Formed Steel Framed/Wood Sheathed Floor and Roof Diaphragm Structures

Dimitrios Lignos

The seismic in-plane response of cold-formed steel (CFS) framed diaphragm structures has not been the subject of extensive study. The information available specific to diaphragm design in the North American CFS design standard is based on limited experimen ...

International Association of Earthquake Engineering2017

Design and manufacturing of high inductance planar coils for small scale sensing applications

Yves Perriard, Yoan René Cyrille Civet, Jasha Poliakine

This work addresses the design and fabrication of small scale planar coils with high number of turns (> 100) and self inductances up to 32 H suitable for the enhancement of inductive sensors performances. First, the modified Wheeler’s formula is used to de ...

Elsevier Ltd.2016