Densité de puissance | EPFL Graph Search

La densité de puissance (ou densité volumique de puissance, ou simplement puissance volumique) est la quantité de puissance (débit d'échange d'énergie) emmagasinable par un système physique donné, divisé par le volume de ce système. Cette grandeur physique traduit la capacité du système à transmettre de l'énergie, à volume donné. On l'exprime en watts par mètre cube (). La densité de puissance peut être un critère important lorsqu'il existe une contrainte sur le volume disponible. Notes et références Annexes Articles connexes

Densité massique d'énergie : quantité d'énergie par unité de masse
Densité surfacique de puissance
Puissance massique : puissance par unité de masse

Catégorie:Grandeur volumique Catégorie:Thermodynamique

Determining The Potential Of Salinity Gradient Energy Source Using An Exergy Analysis

Arash Emdadi

Mixing of fresh (river) water and salty water (seawater or saline brine) in a control fashion would produces an electrical energy known as salinity gradient energy (SGE). Two main conversion technologies of SGE are membrane-based processes; pressure retarded osmosis (PRO) and reverse electrodialysis (RED). In PRO, semipermeable membranes placed between the two streams of solutions allow the transport of water from low-pressure diluted solution to high-pressure concentrated solution. RED requires two alternating semipermeable membranes that allow the diffusion of the ions but not the flow of H2O. Lifetime and power density of the semipermeable membrane are two main factors affecting on deployment of PRO and RED. Semipermeable membranes with lifetime greater than 10 years and power density higher than 5 W/m(2) would lead to faster development of this conversion technology. An exergy analysis of an SGE system of sea-river can be applied to calculate the maximum potential power for electricity generation. Seawater is taken as reference environment (global dead state) for calculating the exergy of water since the seawater is the final reservoir. Once the fresh water is mixed with water of the sea or lake it becomes unuseful for human, agricultural or industrial uses loses all its exergy. Aqueous sodium chloride solution model is used in this study to calculate the thermodynamic properties of seawater. This model does not consider seawater as an ideal model and provides accurate thermodynamics properties of sodium chloride solution. As a case study, exergy calculation of Iran's Urmia Lake- GadarChay River system. The chemical exergy analysis considers sodium chloride (NaCl) as main salt in the water of Lake Urmia. The sodium chloride concentration is more than 200 g/L in recent years. Based on the exergy results the potential power of this system is 329 MW. This results indicates a high potential for constructing power plant for salinity gradient energy conversion.

Amer Soc Mechanical Engineers2016

Swiss SOFC Integration Activities : Stacks, Systems, and Applications

Raphaël Ihringer

Solid Oxide Fuel Cell (SOFC) application development is very well represented in Switzerland by two companies. Sulzer Hexis AG is one of the world leaders in the commercialization of SOFC systems for single family houses. A smaller company, HTceramix, is active in novel processing routes for cells and in innovative stack designs. This article first presents the benefits of implementing SOFC in selected applications and markets. Then the current state-of-the-art in stacking is described for both Swiss stack designs, looking at power density, and electrical efficiency. It is remarkable that both stacks currently exhibit a unique characteristic in SOFC design: the absence of side sealing, which permits to significantly simplify the stack assembly and thus improve its reliability. Finally, the two generations of SOFC systems produced by Sulzer Hexis are presented. The HXS 1000 Premiere preseries system is evaluated on the basis of the extended demonstration program currently underway where 110 systems are in operation in single family houses and public buildings. The near-series system is then introduced with respect to the identified needs in reduction of investment and operating costs as well as size and weight.

2004

Stability and performance of tape cast anode supported electrolyte (ASE) cells.

Raphaël Ihringer, Jan Van Herle

Recent progress in our development of anode supported electrolyte (ASE) SOFcells is reported. The cells are fabricated by cocasting of aqueous slurries of NiO/YSZ and 8YSZ, followed by cofiring. A gradient cathode is deposited by screenprinting successive layers of LSM/YSZ composite and lanthanum cobaltite, followed by a 2nd firing step. Full cells show a final thickness of ? 0.25 mm, high flexibility and reasonable warpage. Proper anode current collection is crucial and obtained by cofiring an additional outer layer together with the substrate. Power density can reach 0.2 W/cm2 at 600°C with active cathodes (LSC, short-lived) and >1 W/cm2 at 810°C with the LSM cathode. Stability was tested during 2900 h, giving an average degradation of 3%/1000 h at 0.5 A/cm2 current density. Degradation can be delayed by short-time polarisation at higher current density: e.g. “reactivation” at 0.85 A/cm2 (30 min.) delayed degradation by 300 h.

European Solid Oxide Fuel Cell Forum2002

Determining The Potential Of Salinity Gradient Energy Source Using An Exergy Analysis

Arash Emdadi

Amer Soc Mechanical Engineers2016