Publications associées à Théorème de Norton

Ripple Voltage and Loss Reduction of Single-Phase ISOP SST by Eliminating the Second Harmonic Current in LLC Converters

Drazen Dujic, Andrea Cervone, Tianyu Wei

In two-stage solid-state transformers with input-series output-parallel structure, the LLC converter operating at a fixed switching frequency is a common choice for the isolated DC/DC conversion stage because it can provide a high efficiency and a fixed vo ...

2024

Tri-Axial Magnetic Field Sensor up to VHF with Frequency Weighing

German Augusto Ramirez Arroyave

This contribution presents an isotropic magnetic field probe with shaped frequency response in the band 100 kHz - 400 MHz to ponder the aggregate response according to the ICNIRP 2020 guidelines. The basic sensor is a printed loop which is modelled as a Th ...

IEEE2023

A novel approach for SPICE modeling of light and radiation effects in ICs

Chiara Rossi

Modeling the interaction of ionizing radiation, either light or ions, in integrated circuits is essential for the development and optimization of optoelectronic devices and of radiation-tolerant circuits. Whereas for optical sensors photogenerated carriers ...

EPFL2021

Analytical Computation of Power Grids’ Sensitivity Coefficients with Voltage-Dependent Injections

Mario Paolone, Sherif Alaa Salaheldin Fahmy

With the increasing need of real-time regulation in power systems, grid-aware-control-frameworks are relying more often on sensitivity coefficients (SCs) to formulate and efficiently solve optimal control problems. As known, SCs are the derivatives of cont ...

IEEE2021

Prediction of optically-triggered amplification in phototransistor with SPICE circuit simulators

Jean-Michel Sallese, Chiara Rossi

Modeling of optoelectronic devices involves long and complex numerical simulations, usually performed with TCAD tools. Numerical simulations provide accurate results for a single device but are not feasible when dealing with a full circuit comprising sever ...

SPIE-INT SOC OPTICAL ENGINEERING2020

A Generalized Index for Static Voltage Stability of Unbalanced Polyphase Power Systems including Thévenin Equivalents and Polynomial Models

Mario Paolone, Andreas Martin Kettner

This paper proposes a Voltage Stability Index (VSI) suitable for unbalanced polyphase power systems. To this end, the grid is represented by a polyphase multiport network model (i.e., hybrid parameters), and the aggregate behavior of the devices in each no ...

IEEE Institute of Electrical and Electronics Engineers2019

Modeling Surface Recombination with Enhanced Devices Network for Optoelectronics

Jean-Michel Sallese, Camillo Stefanucci, Pietro Buccella, Chiara Rossi

We present a lumped devices network approach to simulate surface recombination effects in optoelectronics devices. The network is composed of generalized lumped devices where the excess carrier concentrations and gradients are mapped on electrical quantiti ...

IEEE2018

Battery-Free, Sticker-Like, Device for Health Monitoring, Operated by Optical Power Transfer

Sandro Carrara, Nattakarn Wuthibenjaphonchai

This work presents the concept of a battery-free, sticker-like, device for a non-invasive health-monitoring sensor. The device consists of two functional blocks: an optical power-transfer block and an amperometric measurement block. The former accumulates ...

IEEE2018

SPICE Modeling of Photoelectric Effects in Silicon With Generalized Devices

Jean-Michel Sallese, Camillo Stefanucci, Pietro Buccella, Chiara Rossi

Modeling photoelectric effects in semiconductors with electrical simulators is demonstrated in typical 1-D and 2-D architectures. The concept is based on a coarse meshing of the semiconductor with the so-called generalized lumped devices, where equivalent ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2018

Two Full Parameter Identification Methods for Synchronous Machine Applying DC-Decay Tests for a Rotor in Arbitrary Position

Jean-Jacques Simond, Mai Tu Xuan, Frédéric Michael Maurer

The main obstacle to a wide use of dc-Decay tests lies in the necessity to align the rotor with the d- or q-axis, which is very difficult to perform for high-power units. The goal of this paper is to propose and validate standstill dc-Decay measuring metho ...

Ieee-Inst Electrical Electronics Engineers Inc2017