Publications associées à Ballast (électricité)

Visual comfort without borders: Extending daylight glare prediction to dim daylit environments

Avoiding discomfort glare is one of the critical aspects of maintaining visual comfort, which significantly influences occupants' overall satisfaction with their indoor environment. Discomfort glare prediction models have been developed for various lightin ...

EPFL2022

Diffusion-Bonding Between Strands and Modeling of Splices of Nb3Sn Rutherford Cables

Pierluigi Bruzzone, Kamil Sedlák, Nikolay Bykovskiy

Particle accelerators foresee the use of Nb3Sn in the next generation of dipole magnets. A common design strategy is to grade the coil, i.e., to optimize the quantity of superconductor in the turns with respect to the magnetic field intensity. As a consequ ...

IEEE Institute of Electrical and Electronics Engineers2022

Distributed Optimal Power Flow for VSC-MTDC Meshed AC/DC Grids Using ALADIN

Colin Neil Jones, Yuning Jiang, Xinliang Dai

The increasing application of voltage source converter (VSC) based high voltage direct current (VSC-HVDC) technology in power grids has raised the importance of incorporating DC grids and converters into the existing transmission network. This poses signif ...

IEEE Institute of Electrical and Electronics Engineers2022

Material and Electrical study of HfO2-Based Resistive Random Access Memories (ReRAMs)

Behnoush Attarimashalkoubeh

Resistive Random Access Memories (ReRAMs) have been researched intensively in the last past decades as a promising alternatives technology for the next-generation non-volatile memory (NVM) devices. ReRAMâ s excellent performance properties such as high sw ...

EPFL2019

Medium Frequency Transformer Leakage Inductance Modeling and Experimental Verification

Drazen Dujic, Marko Mogorovic

This paper provides detailed analytical modelling and finite elements method (FEM) analysis of the medium frequency transformer (MFT) leakage inductance, as one of the key design factors governing the operation of galvanically isolated power electronics co ...

2017

Energy analysis of a DEAP based cylindrical actuator coupled with a radial negative stiffness spring

Yves Perriard, Yoan René Cyrille Civet, Jonathan André Jean-Marie Chavanne

The main problem to obtain considerable deformation with dielectric electro-active polymer based technology is the electrical breakdown. A simple solution consists in pre-stretching the elastomer before activating it which cancels the snap-through effect a ...

Spie-Int Soc Optical Engineering2017

Multifunctional shape memory electrodes for dielectric elastomer actuators enabling high holding force and low-voltage multisegment addressing

Herbert Shea, Samuel Rosset, Nadine Besse, David James McCoul

Dielectric elastomer actuators (DEAs) are an attractive form of electromechanical transducer, possessing high energy densities, an efficient design, mechanical flexibility, high speed, and noiseless operation. They have been incorporated into a variety of ...

Institute of Physics2016

Upper critical field, pressure-dependent superconductivity and electronic anisotropy of Sm4Fe2As2Te1-xO4-yFy

László Forró, Andrea Pisoni, Richard Gaal, Bálint Náfrádi, Janusz Andrzej Karpinski, Sergiy Katrych, Péter Szirmai

We present a detailed study of the electrical transport properties of a recently discovered iron-based superconductor: Sm4Fe2As2Te0.72O2.8F1.2. We followed the temperature dependence of the upper critical field by resistivity measurement of single crystals ...

Iop Publishing Ltd2016

Electrical energy balance contest in Solar Decathlon Europe 2012

Inaki Navarro Oiza

Solar Decathlon Europe (SDE) is an international multidisciplinary competition in which 20 university teams build and operate energy-efficient solar-powered houses. The aim of SDE is not only scientific but also educational and divulgative, making visitors ...

Elsevier Science Sa2014

In situ copper–alumina composites

Andreas Mortensen, Carmen Krüger

We present a process for the production of Cu-Al matrix composites containing between 25 and 30 vol.% in situ Al2O3. The composites are prepared by pressing, heat-treating and hot working blended powders of Cu, Al and CuO packed into copper alloy cans. The ...

Elsevier2013