Publications associées à Placage (bois)

Multi-scale characterization and modeling of notched strength and translaminar fracture in hybrid thin-ply composites based on different carbon fiber grades

Owing to their high specific stiffness and strength, Carbon Fiber Reinforced Composites (CFRP) are ideal candidates for the development of lightweight high-performance structures. Within this family, thin-ply composites allow for wider design freedom and p ...

EPFL2023

Cockroach: an open-source tool for point cloud processing in cad

Yves Weinand, Julien Gamerro, Andrea Settimi, Petras Vestartas

In the architecture, engineering and construction (AEC) sector, the use of point cloud data is not a novelty. Usually employed to retrieve data for inspecting construction sites or retrofitting pre-existing buildings, sensors like LiDAR cameras have been k ...

Association for Computer-Aided Architectural Design Research in Asia (CAADRIA)2022

Robotically-Fabricated Nexorades from Whole Timber

Yves Weinand, Aryan Rezaei Rad, Petras Vestartas

This paper introduces the conceptual design of sustainable timber structures using raw wood. It pre-sents a workflow for systematically generating Nexorades using a tiling method for multi-valence quad subdivided surfaces. The system is designed based on a ...

2021

Mechanical properties of a balsa wood veneer structural sandwich core material

Thomas Keller, Anastasios Vassilopoulos, Niloufar Vahedi

Balsa wood is an appropriate core material for structural sandwich applications due to its high strength- and stiffness-to-weight ratios. However, the mechanical properties vary considerably owing to the inherent scattering of natural wood materials. One a ...

2020

Thermomechanical characterization of a balsa-wood-veneer structural sandwich core material at elevated temperatures

Thomas Keller, Anastasios Vassilopoulos, Chao Wu, Niloufar Vahedi

The tensile, compressive and shear behavior of standardized specimens cut from a veneered balsa wood used as structural sandwich core was investigated at ambient temperatures of up to 250 degrees C. The average moisture content was 9.1%. The specimens' res ...

ELSEVIER SCI LTD2020

Experiments and numerical modelling on angle-ply laminates under remote mode II loading

John Botsis, Georgios Pappas, Charlie Joseph Simon Blondeau

Delamination is a very frequent damage mechanism that affects the integrity of laminated composites. In this study, the effect of ply orientation on crack growth resistance was analyzed for three different anti-symmetric interfaces (+/- 30 degrees, +/- 45 ...

ELSEVIER SCI LTD2020

Rotational mechanical behaviour of wood-wood connections with application to double-layered folded timber-plate structure

Yves Weinand, Julien Gamerro, Christopher Werner Matthias Robeller

This paper is focused on the structural design of an innovative wood-wood connection designed for a full-scale double-layered timber folded-plate structure: the new Vidy theatre pavilion (Lausanne, Switzerland). Investigations into the potential of these n ...

2018

Fracture of thin-ply composites : effects of ply thickness

Guillaume Frossard

The demand for carbon/epoxy laminated composites is continuously increasing due to their high specific modulus and strength. Among them, laminates made of particularly thin layers (from t=0.015 to 0.150 mm) and called thin-ply composites are gaining in int ...

EPFL2017

Semi-Rigid Moment-Resisting Behavior of Multiple Tab-and-Slot Joint for Freeform Timber Plate Structures

Stéphane Nicolas Roche

Historically based on the transfer of ancestral know-how, the art of carpentry changed considerably at the beginning of the 21st century with the arrival on the market of engineered wood products (EWP) and computer numerically controlled machines (CNC). Th ...

EPFL2017

Mode I interlaminar fracture of carbon epoxy laminates: Effects of ply thickness

John Botsis, Joël Cugnoni, Thomas Gmür, Guillaume Frossard

In this work, the influence of ply thickness on strain energy release rate (ERR) in delamination of carbon epoxy laminates is addressed. Specimens with three ply thicknesses: 0.030, 0.075 and 0.150 mm are tested. While the ERR at onset of crack propagation ...

Elsevier2016