Publications associées à Compresseur centrifuge

The influence of splitter blades and meridional profiles on the performance of small-scale turbopumps for ORC applications; analysis, neural network modeling and optimization

Jürg Alexander Schiffmann, Sajjad Zakeralhoseini

This work presents the influence of splitters on the performance of small-scale turbopumps for organic Rankine cycle applications numerically. Different design parameters, such as impeller diameter at the outlet, number of blades, blade angle at the traili ...

2023

Design, computational and experimental investigation of a small-scale turbopump for organic Rankine cycle systems

Jürg Alexander Schiffmann, Sajjad Zakeralhoseini

The hydraulic design, computational analysis, and experimental investigations of a high-speed small-scale turbopump for mobile waste heat recovery applications based on organic Rankine cycle systems are presented in this paper. Such applications demand hig ...

Elsevier2023

An Integrated Approach to Designing Robust Turbocompressors on Gas Bearings Through Surrogate Modeling and Constrained Multi-Objective Optimization

Jürg Alexander Schiffmann, Soheyl Massoudi, Cyril Picard

Designing turbocompressors is a complex and challenging task, as it involves balancing conflicting objectives such as efficiency, stability, and robustness against manufacturing deviations. This paper proposes an integrated design methodology for turbocomp ...

ASME Amer Soc Mechanical Engineers2023

Thermal management for gas lubricated, high-speed turbomachinery

Jürg Alexander Schiffmann, Luis Eric Olmedo Ocampo, Wei Liu, Wanhui Liu

High-speed turbomachinery is commonly designed to achieve high power densities. Limited space for active cooling results in a challenging thermal management. A thermal modeling approach leveraging modern declarative programming capabilities is presented, y ...

2023

Small-scale turbopumps for waste heat recovery applications based on an organic Rankine cycle: a study from pre-design to experimental validation

Sajjad Zakeralhoseini

The organic Rankine cycle (ORC) system is among the technologies applied to exploit waste heat in vehicles. Since common organic fluids have lower latent heat than water, higher mass flow rates are required to convert the same waste heat, considerably incr ...

EPFL2023

Robust design using multiobjective optimisation and artificial neural networks with application to a heat pump radial compressor

Jürg Alexander Schiffmann, Soheyl Massoudi, Cyril Picard

Although robustness is an important consideration to guarantee the performance of designs under deviation, systems are often engineered by evaluating their performance exclusively at nominal conditions. Robustness is sometimes evaluated a posteriori throug ...

2022

Real-time optimization of load sharing for gas compressors in the presence of uncertainty

Dominique Bonvin, Timm Faulwasser, Alejandro Gabriel Marchetti, Predrag Milosavljevic

This paper investigates the problem of load-sharing optimization of gas compressors in the presence of uncertainty. The objective is to operate a set of compressor units in an energy-efficient way, while at the same time meeting a varying load demand. The ...

ELSEVIER SCI LTD2020

The Role of Reynolds Number Effect and Tip Leakage in Compressor Geometry Scaling at Low Turbulent Reynolds Numbers

Jürg Alexander Schiffmann, Markus Diehl, Christoph Schreiber

In compressor design, a convenient way to save time is to scale an existing geometry to required specifications, rather than developing a new design. The approach works well when scaling compressors of similar size at high Reynolds numbers but becomes more ...

2020

Scale limitations of gas bearing supported turbocompressors for vapor compression cycles

Jürg Alexander Schiffmann

An analysis of single-stage centrifugal compressors supported on dynamic, gas lubricated bearings for driving vapor compression cycles suggests that the maximum feasible compressor power is limited, primarily by the bearing load capacity, in the range from ...

2020

Theoretical and Experimental Investigation of a Small-scale, High-speed, and Oil-free Radial Anode Off-gas Recirculation Fan for Solid Oxide Fuel Cell Systems

Jan Van Herle, Jürg Alexander Schiffmann, Patrick Hubert Wagner

The Laboratory for Applied Mechanical Design (LAMD) designed, manufactured, and experimentally tested a novel recirculation fan for a 10 kWe solid oxide fuel cell (SOFC). The fan uses oil-free bearings, more specifically herringbone-grooved journal and spi ...

2020